







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with







See the difference
Before
After
Before
After
Before
AfterHow Much Does Vinyl Fence Installation Cost in Jacksonville?
Vinyl fence installation in Jacksonville, FL typically runs $3,500 to $9,000 for a standard residential yard in 2026. Most homeowners with a 150 to 200 linear foot backyard fence land right around $5,800, which covers mid-grade vinyl panels, pressure-treated posts, concrete footings, and full installation labor. Shorter runs or basic 4-foot styles can drop near the bottom of that range, while privacy-height fencing with gates, decorative post caps, and tricky grading will push toward the top.
Key Takeaways
- Average vinyl fence project in Jacksonville: $3,500 – $9,000
- Per-linear-foot pricing runs $22 – $45, materials and labor included
- Privacy fences cost more than picket or ranch rail styles
- Gates add $300 – $1,200 each, depending on width and hardware
- Removal of an old fence adds $400 – $1,200 to the total
- Moist, sandy Jacksonville soil sometimes requires deeper post setting, which raises labor

Vinyl Fence Installation Cost Breakdown (2026)
Here’s what a typical vinyl fence job looks like line by line in the Jacksonville market. These numbers assume a standard 150 linear foot run with one walk gate.
| Line Item | Typical Cost Range |
|---|---|
| Vinyl fence panels (150 linear ft, 6 ft height) | $1,800 – $3,600 |
| Posts and post caps | $450 – $900 |
| Concrete footings (24 – 30 inches deep) | $350 – $700 |
| Gate (walk gate, with hardware) | $300 – $600 |
| Installation labor | $1,000 – $2,500 |
| Old fence removal and haul-off (if needed) | $400 – $1,000 |
| Permit fees (Duval County, when required) | $0 – $200 |
| Typical total | $3,500 – $9,000 |
What moves the number most is the linear footage. A small 80 foot side-yard fence in Mandarin might land at $2,800, while a full 250 foot perimeter with two gates out in Bartram Park runs closer to $11,000. Height also matters. Most Jacksonville homeowners choose 6 foot privacy panels, but dropping to a 4 foot picket style cuts material costs by roughly 20 percent.
Soil conditions deserve attention here because they are genuinely local. Jacksonville sits on a mix of sandy loam and, in lower-lying areas near the St. Johns River, dense clay. Digging post holes in clay labor costs run higher because the auger moves slower and the crew spends more time on each hole. In sandy soil, holes go in fast but can collapse, which means the crew may need to sleeve posts or use wider footings. Both conditions add time, and time is labor.
At Bradford Remodeling Co Jacksonville, we give you a home written price before any work starts. Not a range, not a rough guess. A line-itemed number. That number includes the post depth required for your specific soil, the exact panel count, the gate type, and any necessary permitting. It goes in writing and it does not move at the door.
What Affects Vinyl Fence Installation Pricing in Jacksonville
- Linear footage. This is the single biggest driver. Jacksonville lots vary widely, from compact Arlington yards at 90 linear feet to sprawling Northside or Southside properties pushing 300 feet. Every extra panel is more material and more post holes.
- Fence height and style. A 4 foot picket fence runs about $22 – $28 per linear foot. A 6 foot privacy fence runs $28 – $38. Add lattice toppers or decorative rail styles and you push $40 – $45 per foot.
- Gates. A single walk gate adds $300 – $600. A double drive gate for boat or trailer access adds $800 – $1,200. Jacksonville homes with boat storage will often need a wider gate, and wider gates mean heavier posts and stronger hinges.
- Removal of existing fence. If you’re replacing an old wood or chain link fence, expect to add $400 – $1,000 for removal and haul-off. In neighborhoods like San Marco and Riverside, where lots are tight, crews may need to hand-carry debris to the street, which raises time.
- Post depth and soil conditions. Standard post setting runs 24 inches deep. In Jacksonville’s clay-heavy pockets, we sometimes go 30 – 36 inches for stability. Deeper holes mean more concrete and more labor. It is the kind of thing a cheap quote skips and a foundation problem later reveals.
- Permitting. Duval County generally does not require a permit for a fence under 6 feet tall, but some HOA-governed communities like Nocatee, Julington Creek Plantation, or Bartram Springs have their own review processes. We check before the quote, not after the dig.

How to Save on Vinyl Fence Installation
Saving money on a vinyl fence does not mean buying off-brand panels that yellow in two Jacksonville summers. It means making decisions that cut labor and material waste without cutting the product’s lifespan.
- Keep the layout simple. Every corner, jog, or grade change adds a post, a custom cut, and time. A straight run from the back corner of your house to the property line is the cheapest fence you’ll ever buy.
- Match the fence to the function. If you are fencing a front yard for curb appeal, a 4 foot picket style does the job for 20 percent less than a 6 foot privacy panel. If you need to block the neighbor’s view in Murray Hill, privacy height is worth the money.
- Plan gates once. Widening a gate later means cutting into an installed fence. Decide where the gate goes before the posts go in. This sounds obvious. It is the single most common change order we see.
- Do the prep work where it is safe. Removing shrubs, moving planters, and clearing ivy off an old fence before we arrive saves time. We are not going to pressure you, but if the area is clear, the job goes faster and the invoice reflects it.
- Ask for the written price. At Bradford Remodeling Co Jacksonville, every vinyl fence installation in Jacksonville we quote includes a free estimate with a line-itemed, written price. Call (904) 337-5929 and we will walk the property, measure it, check the soil, and hand you a number you can take to the bank.
Vinyl Fence Installation Timeline in Jacksonville
Most residential vinyl fence installations in Jacksonville take 1 to 2 days once materials are on site. Removal of an old fence adds a half day. Clay-heavy digging can stretch the timeline by another half day. Here is how a typical job runs:
- Day 1: Layout and marking, post hole digging, post setting in concrete. Crew leaves the posts to cure overnight.
- Day 2: Panel installation, gate hanging, hardware adjustment, and full site cleanup. We walk the line with you before we pack up to confirm every post is plumb and every panel is seated.
What the timeline does not include is waiting on an HOA. If your community requires architectural review, add a week to three weeks before the job starts. We flag it during the estimate and help with the paperwork.
Vinyl Fence vs. Other Fencing Materials in Jacksonville
Vinyl is not the only option in Northeast Florida, and sometimes it is not the right one. Here is an honest comparison based on what we see in the market.
- Vinyl: $22 – $45 per linear foot. Twenty to thirty year lifespan. Resists rot, termites, and the salt air that eats metal in Atlantic Beach and Mayport. No painting or staining, ever. Fades slightly over time, especially in full sun.
- Aluminum: $26 – $50 per linear foot. Thirty year plus lifespan. Better for pool enclosures where building code requires visibility. More expensive than vinyl, but more rigid.
- Wood: $18 – $38 per linear foot. Eight to fifteen year lifespan in Jacksonville humidity without constant treatment. Cheaper up front, but the maintenance and replacement cost over twenty years flips the math in vinyl’s favor.
- Chain link: $12 – $22 per linear foot. Twenty year lifespan. Low privacy, low curb appeal, but the cheapest way to contain a dog.
For most Jacksonville homeowners, vinyl wins on total cost of ownership. You pay more than wood on day one, but you will not be sanding, staining, or replacing rotted pickets in year ten. The humidity and rain here give wood fences a short life.
Why the 365-Day Done Right Promise Matters on a Fence
A fence is a structural installation, and in Jacksonville, the ground moves. Sandy soil settles. Clay soil expands and contracts with rain. A post that was plumb in February can shift slightly by August. That is exactly the kind of thing that falls through the cracks with a contractor who cashes the check and disappears.
Here is what the 365-Day Done Right Promise covers: if your fence does not hold up within the first full year, Bradford Remodeling comes back and corrects it at no charge. A post that has settled out of plumb. A gate that no longer swings true. A panel that has warped or pulled from the post. We return and fix it. The guarantee runs for one year from the day the job is completed and it is in writing, in your hand, before we leave the site.
This is The Garrison Standard, and it is not a marketing phrase. It is the operating manual. Every Bradford location, including ours in Jacksonville, is held to it. The Garrison Code dictates how we bid a job, how we run a site, and how we close it out. You get the written price up front, the written guarantee at the end, and the promise in between that a background-checked, uniformed crew is doing the work.
How Bradford Remodeling Co Jacksonville Handles a Fence Job
Curtis Lane runs the Jacksonville operation, and he keeps the crew on a tight process. It starts the same way every time. You call, a live person answers, and we set a time to walk the property. No voicemail tag. We measure the run with a wheel, not a guess. We check the soil where the posts will go. We confirm your property line and any HOA requirements. Then we sit down and write out the price.
The quote is line-itemed. Panels, posts, concrete, gates, removal, labor. Every number has a reason next to it. If the ground looks like clay, the labor line reflects it. If an old fence needs hauling, that line is on the page. You will not get a surprise invoice at the end because the surprise would have been on the quote.
On job day, the crew shows up uniformed and background-checked. The post holes go to the depth specified in the quote. The concrete gets mixed on site, not guessed. The panels seat square and the gate hangs level. When the last panel is in, we walk the line with you and hand you the written guarantee. The site is cleaner than we found it.
FAQs – Vinyl Fence Installation Cost in Jacksonville
How much does a vinyl fence cost per foot in Jacksonville, FL?
The cost of vinyl fence installation in Jacksonville runs $22 – $45 per linear foot fully installed. That range covers a 4 foot picket fence at the low end up to a 6 foot privacy fence with decorative features at the top. For an exact number on your specific yard, call (904) 337-5929 and we will walk the line with a measuring wheel.
Is vinyl fencing cheaper than wood?
No. Vinyl runs $22 – $45 per linear foot installed, while a wood fence in Jacksonville runs $18 – $38. But vinyl’s lifespan of twenty to thirty years versus wood’s eight to fifteen in this humidity makes vinyl the cheaper option over time. Wood requires staining or replacement within a decade. Vinyl typically does not.
Does a vinyl fence increase home value in Jacksonville?
A 6 foot vinyl privacy fence adds curb appeal and enclosure value in neighborhoods across Mandeville, Ortega, and the Southside, typically improving buyer interest without a measurable line-item appraisal. Realistically, expect it to help the home show better rather than adding a fixed dollar figure. If you are thinking about a fence before listing, call (904) 337-5929 for a written price you can weigh against your timeline.
How long does a vinyl fence last in Florida’s climate?
A quality vinyl fence in Jacksonville lasts 20 – 30 years, even with full exposure to Florida sun, humidity, and salt air. Panels may fade slightly over time but they will not rot, warp, or get eaten by termites the way wood does. Post depth and concrete quality are the factors most likely to shorten that lifespan, which is why the footing work matters more than the panel brand.
Can you install a vinyl fence year-round in Jacksonville?
Yes. Jacksonville’s climate allows fence installation in every month, though mid-summer heat slows crews slightly and afternoon thunderstorms occasionally pause a pour. Rain does not prevent post setting. If you want a realistic project window for your yard, call (904) 337-5929 and we will give you a straight answer.
Do you need a permit for a vinyl fence in Jacksonville?
In most of Duval County, a residential fence under 6 feet tall does not require a building permit. However, some HOA communities in Jacksonville, including Nocatee and Bartram Springs, have their own review process. We check that requirement before quoting so there are no surprises.
Pricing reflects the Jacksonville market as of 2026. Bradford Remodeling Co Jacksonville offers free estimates – call (904) 337-5929.
Written by Curtis Lane, Owner at Bradford Remodeling Co Jacksonville, serving Jacksonville since 2004.
What Our Customers Say
"Painting and drywall repair were flawless. They patched the drywall seams and the paint matches the old wall."
- Cal P."Replaced old windows and trim while redoing the kitchen. Clean finish work."
- Ron F."Solid job. Small punch list items were done within a few days of the walkthrough."
- Beth K.











