Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Paver Driveway Installation Cost in Jacksonville?
Paver driveway installation in Jacksonville, FL typically runs between $7,000 and $18,000 for a standard two-car driveway in 2026. Most homeowners in neighborhoods like Mandarin, Riverside, and San Marco pay around $11 to $16 per square foot for materials and labor combined. The final number depends on paver type, driveway size, site prep, and whether you’re replacing an existing driveway or starting fresh.
Bradford Remodeling Co Jacksonville puts every paver driveway price in writing before work begins. No numbers move at the door. Call (904) 337-5929 for a free estimate on your driveway.
Key Takeaways:
- Typical paver driveway cost in Jacksonville: $7,000 – $18,000 total, or $11 – $16 per square foot
- Concrete pavers (the most common choice locally) run $10 – $14 per square foot installed
- Clay brick pavers cost more, typically $14 – $20 per square foot installed
- Most Jacksonville paver driveway jobs take 3 to 7 days from tear-out to final compaction
- Bradford Remodeling backs every paver driveway with the 365-Day Done Right Promise, in writing
Paver Driveway Installation Cost Breakdown (2026)
Here’s what the numbers actually look like for a paver driveway in Jacksonville right now. These ranges reflect current material costs, local labor rates, and the prep work Florida soil requires.
| Cost Component | Typical Range (Jacksonville, 2026) | Notes |
|---|---|---|
| Site evaluation and written estimate | $0 | Always free with Bradford. You get a written price before any work starts. |
| Tear-out of existing driveway | $800 – $2,500 | Concrete removal and haul-off. Asphalt removal runs slightly lower. |
| Excavation and grading | $600 – $1,800 | Jacksonville’s sandy soil usually grades well, but tree roots in older neighborhoods like Avondale can add cost. |
| Base material (limerock or crushed concrete) | $1,200 – $3,000 | Florida driveways need a 6- to 8-inch compacted base to handle the wet season. |
| Sand bedding layer | $300 – $800 | 1 inch of screeded sand before pavers go down. |
| Pavers (material only) | $4,200 – $9,000 | Concrete pavers: $4 – $7/sq ft. Clay brick: $7 – $11/sq ft. Natural stone: $10 – $16/sq ft. |
| Labor and installation | $1,800 – $4,500 | Cutting, laying, pattern work, and edge restraints. |
| Joint sand and final compaction | $200 – $600 | Polymeric sand recommended in Jacksonville to resist washout from heavy rains. |
| Sealing (optional but recommended) | $400 – $1,200 | Extends paver life and resists mildew in Jacksonville’s humidity. |
For a 600-square-foot driveway, here’s what that translates to by paver type:
- Concrete pavers (600 sq ft): $6,600 – $8,400 installed
- Clay brick pavers (600 sq ft): $8,400 – $12,000 installed
- Natural stone or travertine (600 sq ft): $12,000 – $18,000 installed
What drives the price up or down? Driveway size is the biggest lever. A single-car driveway in Murray Hill might run $4,500 – $7,000, while a wide double driveway with a turnaround in Deerwood can push past $20,000. Access matters too: if the crew can’t get a skid steer into the backyard for a side driveway, more of the work gets done by hand, and labor hours climb.
What Affects Paver Driveway Installation Pricing in Jacksonville
Jacksonville’s climate, soil, and building patterns have a direct impact on what you’ll pay. Here’s what’s actually moving the numbers in this market:
- Paver material choice. Concrete pavers dominate Jacksonville because they handle heat and rain well at $4 – $7 per square foot. Clay brick pavers in the Riverside and Avondale historic districts often get required by local preservation standards, and they run $7 – $11 per square foot. Travertine looks sharp but costs more and needs more sealing in our humidity.
- Base depth and soil conditions. Jacksonville sits on sandy, quick-draining soil in most areas, which keeps base prep straightforward. But homes near the St. Johns River, particularly in San Marco and Ortega, can hit clay or organic soil that requires deeper excavation and sometimes geotextile fabric, adding $500 – $1,500 to a typical job.
- Driveway slope and drainage. A flat driveway is the cheapest scenario. If your driveway slopes toward the house, the crew needs to grade for proper runoff and sometimes add a channel drain. That’s real scope, not fluff: expect $800 – $2,000 in added drainage work on sloping lots.
- Existing driveway condition. Tearing out a crumbling concrete slab costs $800 – $2,500. If the old driveway is asphalt and it’s in decent shape, the crew can sometimes cap it and lay pavers on top, which saves $1,000 or more. That decision gets made on-site, in writing, before work starts.
- Driveway size and layout. Standard two-car driveways in Jacksonville run 500 – 700 square feet. Wider driveways, circular drives, or driveways with aprons and walkways attached add square footage fast. Each additional 100 square feet is roughly $1,100 – $1,600 in materials and labor.
- Permits and code requirements. The City of Jacksonville requires permits for driveway work when it changes the impervious surface area on the lot. Permit fees are generally $100 – $400, and your contractor should handle the paperwork as part of the job. Bradford pulls permits on every paver driveway that requires one, and the written estimate includes the fee.
Why Jacksonville Weather Makes Paver Base Prep Non-Negotiable
We don’t skip base work on any driveway in Duval County, and there’s a reason for that. Jacksonville gets 50-plus inches of rain in a typical year, and the summer afternoon thunderstorms come hard. A poorly compacted base under a paver driveway will wash out, sink, or shift within a season or two.
The standard we hold to on every paver driveway is a compacted base of 6 to 8 inches, with the subgrade tamped before base goes down. In flood-prone areas near the intracoastal, we often recommend 8 inches and a geotextile separator. That’s the difference between a driveway that still looks level after five years and one that develops ruts after the first big wet season.
Heat matters too. Jacksonville’s summers push pavement surface temperatures well past 130 degrees. Cheap pavers with poor colorant fade visibly in two or three years. We install Belgard and Unilock pavers on driveway projects because those manufacturers publish specs on color stability and load rating. You know exactly what you’re getting, and the manufacturer warranty backs the material while our 365-Day Done Right Promise backs the installation.
Paver Driveways vs. Concrete and Asphalt in Jacksonville
You should know the numbers before you choose. Here’s the honest comparison for the Jacksonville market:
- Concrete driveway (poured): $4,500 – $12,000. Lower upfront cost, but Jacksonville’s wet-dry cycle cracks concrete, and repairs are visible. Lifespan before real deterioration: 15 – 20 years.
- Asphalt driveway: $3,500 – $9,000. Cheapest option. Softer under Florida heat, needs resealing every 2 – 3 years, and starts to look tired in about a decade.
- Paver driveway: $7,000 – $18,000. Highest upfront cost, but the driveway flexes with the soil instead of cracking. Individual pavers can be replaced if one breaks. Lifespan when installed correctly: 25 – 30 years or more.
If you’re comparing against a poured concrete driveway, remember that concrete has to be torn out entirely when it fails. A paver driveway gets repaired one paver at a time. That’s why many Jacksonville homeowners in areas with shifting sandy soil choose pavers even though the initial number is higher.
For the full scope of what a paver driveway project involves in this market, read our Paver Driveway Installation in Jacksonville page.
How the Installation Process Works
Here’s what a paver driveway job looks like when it’s run by the book, the way Bradford runs it:
- Site walk and written estimate. Curtis Lane or a member of our team walks the driveway, takes measurements, checks drainage and access, and puts a written price in your hand. That price includes materials, labor, equipment, haul-off, and permit fees. It does not change at the door.
- Utility marking and permit pull. We call 811 to mark underground lines, and we pull the Jacksonville permit if the project triggers one. This happens before any equipment shows up.
- Tear-out and excavation. The old driveway comes out. We excavate to the depth the base requires, typically 8 to 12 inches below finished grade depending on paver thickness and base depth.
- Base installation and compaction. Limerock or crushed concrete goes down in lifts, each lift compacted with a plate compactor. This step takes the longest on most Jacksonville jobs, and it’s the one that determines whether the driveway stays flat.
- Sand screed and paver laying. One inch of sand gets screeded flat, then pavers go down in the pattern you chose. Borders get cut to fit. Edge restraints hold the perimeter.
- Joint sand and final compaction. Polymeric sand fills the joints. A final pass with the compactor locks everything in. In Jacksonville’s rain, polymeric sand is the right call because it hardens and resists washout.
- Sealing (if you opt in). A quality paver sealer protects against staining and UV fade. This is optional, but most of our Jacksonville paver driveways include it, and the written estimate breaks it out as a line item.
- Close-out. The site is clean, the edges are dressed, the dumpster leaves, and you get a signed written guarantee covering the installation for a full year.
Timeline for most two-car driveways in Jacksonville: 3 to 7 working days, weather permitting.
What The Garrison Standard Means on a Paver Driveway
Bradford Remodeling is a member of the Garrison Partners family, established in 2004. We operate under The Garrison Standard, which is a simple framework: every price in writing, every scope documented, every guarantee on paper, and a live person answering the phone 24/7.
On a paver driveway, that standard shows up in specific ways:
- Written price before work starts. No exceptions, no verbal side deals, no “we’ll figure it out later.” The price you sign is the price you pay. If we find a problem during excavation, like an unexpected tree-root mat or a buried stump, we stop work and put the change in writing before proceeding. You approve it. Then and only then does the number move.
- 365-Day Done Right Promise. Every paver driveway Bradford installs carries a full-year written guarantee. If the driveway settles, shifts, or fails within that year, we return and correct it at no charge. That’s not a marketing line. It’s a written term, and you get a copy at close-out.
- Background-checked, uniformed technicians. You know who’s coming to your house before the truck pulls up. Every technician on a Bradford job site has passed a background check and wears a company uniform. No day laborers, no unknowns.
- Live-person phone coverage, 24/7. If you call at 7 a.m. or midnight, a real person answers. No voicemail queue, no automated phone tree. That matters when a storm knocks a branch onto your new driveway and you need to know if you’re covered.
- Documented materials. We install Belgard and Unilock pavers, brands with published engineering specs and manufacturer warranties. You’re not getting generic pavers from a bulk supplier with no traceability. The pavers on your driveway have a name and a warranty behind them.
How to Save on Paver Driveway Installation in Jacksonville
Saving money on a paver driveway isn’t about finding the cheapest bid. The cheapest bid in Jacksonville usually means a 3-inch base, unbranded pavers, and no permit pulled. That driveway fails in three years and costs more to fix than the original install. Here’s how to actually save money without cutting the corners that matter:
- Time your project for the dry season. Jacksonville’s rainy season runs June through September. Scheduling your paver installation between October and May means fewer weather delays, cleaner excavation, and better compaction. Some contractors quote slightly lower labor rates during the slower winter months, though Bradford’s written pricing stays consistent year-round because we don’t play pricing games.
- Choose concrete pavers over clay brick or natural stone. Concrete pavers in standard colors (charcoal, sandstone, or a mixed blend) run $4 – $7 per square foot. Clay brick starts around $7 and goes up from there. If you want the brick look in Riverside without the brick price, a concrete paver in a tumbled finish gets you most of the aesthetic at 60 percent of the cost.
- Keep the pattern simple. A running bond or 45-degree herringbone pattern goes down fast. Circular patterns, border inlays, and mixed-size layouts add cutting time, which adds labor hours. A simple pattern costs less and holds up just as well.
- Stick to the footprint you already have. Every additional 100 square feet adds roughly $1,100 – $1,600. If you’re redoing a driveway and you don’t need the extra width, don’t add it. You can always expand later since pavers blend reasonably well if you keep the original paver on file.
- Combine the driveway with a walkway or patio. If you’re already paying for excavation, base material, and equipment mobilization, adding a paver walkway or small patio to the project spreads those fixed costs. The marginal cost of added square footage is lower than starting a separate job later.
- Get the written price and compare it line by line. When you get a written estimate, look at the line items. How deep is the base? What paver brand is specified? Is the permit included? Is haul-off included or billed separately? A low total price with thin base depth isn’t a deal, it’s a future repair bill. Bradford gives you the full written breakdown every time. Call (904) 337-5929 and you’ll see what a real estimate looks like.
FAQs – Paver Driveway Installation Cost
How much does a paver driveway cost per square foot in Jacksonville?
Installed paver driveways in Jacksonville run $11 to $16 per square foot in 2026, including materials and labor. Concrete pavers land at the lower end of that range, clay brick in the middle, and natural stone at the top. Call (904) 337-5929 for a free written estimate on your specific driveway.
Is a paver driveway cheaper than concrete in Jacksonville?
No. A poured concrete driveway in Jacksonville runs $4,500 – $12,000, while a paver driveway runs $7,000 – $18,000 for comparable sizes. Pavers cost more upfront but last 25 – 30 years versus 15 – 20 for concrete in this climate, and pavers can be spot-repaired while concrete requires full replacement when it cracks.
How long does paver driveway installation take in Jacksonville?
Most two-car paver driveways in Jacksonville take 3 to 7 working days from tear-out to final compaction. Weather delays are most common during the June – September rainy season. Bradford’s written estimate includes a projected timeline, and the 365-Day Done Right Promise covers the installation for a full year after close-out.
Do I need a permit for a paver driveway in Jacksonville?
Yes, in most cases. The City of Jacksonville requires permits when driveway work changes the impervious surface area on your lot. Permit fees typically run $100 – $400. Bradford pulls the permit as part of the job, and the written estimate includes the fee so you’re not surprised later.
Can paver driveways handle Jacksonville’s rainy season?
Yes, when the base is built right. Jacksonville gets 50-plus inches of rain annually, so a paver driveway needs a 6- to 8-inch compacted base with proper drainage. Bradford uses polymeric sand in the joints to resist washout during heavy storms. A correctly installed paver driveway in Jacksonville drains better than a concrete slab because water moves through the joints instead of pooling on the surface.
What does the 365-Day Done Right Promise cover on a paver driveway?
The Promise covers the installation itself: if the driveway settles, shifts, or fails within one year of completion, Bradford Remodeling returns and corrects the work at no charge. You get the guarantee in writing at close-out, signed and dated. It’s not a verbal promise; it’s a documented term.
Get a Free Paver Driveway Estimate in Jacksonville
If you’re ready to see real numbers for your driveway, call (904) 337-5929. Curtis Lane and the Bradford Remodeling Co Jacksonville team will walk the site, check the drainage, measure the footprint, and put a written price in your hand. That price includes materials, labor, permits, and haul-off, and it will not change at the door.
Bradford Remodeling Co Jacksonville has been part of the Garrison Partners family since 2004, held to The Garrison Standard on every job. That means a written price before work starts, a 365-Day Done Right Promise in writing, background-checked and uniformed technicians on site, and a live person answering the phone 24 hours a day, 7 days a week.
You can also learn more about our process and what’s included on our home page. When you’re ready for a driveway that’s installed by the book and backed in writing, call us.
Pricing reflects the Jacksonville market as of 2026. Bradford Remodeling Co Jacksonville offers free estimates – call (904) 337-5929.
Written by Curtis Lane, Owner at Bradford Remodeling Co Jacksonville, serving Jacksonville since 2004.
What Our Customers Say
"Home remodel with a new floor plan. Handled structural work and permits without drama."
- Gus R."Painting and drywall repair were flawless. They patched the drywall seams and the paint matches the old wall."
- Cal P."Replaced old windows and trim while redoing the kitchen. Clean finish work."
- Ron F.
