Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Wellborn Bathroom Remodeling: The Jacksonville Owner’s Guide
We install Wellborn-compatible bathroom vanities, cabinets, and linen towers in Jacksonville, and we keep the mounting hardware, hinges, drawer slides, and matching trim pieces on hand for most Wellborn lines. A full Wellborn bathroom remodel in Jacksonville typically runs $9,000 to $28,000 installed, and we handle the parts matching, rough-in adjustments, and finish work so the new pieces sit square and hold. Most homeowners discover a problem the same way: a drawer that drags, a door that won’t stay shut, or a vanity that has started to swell at the base from Florida humidity and a slow supply-line drip that nobody caught in time.
Key Takeaways
- Wellborn bathroom remodels in Jacksonville run $9,000 to $28,000 installed, depending on scope and what has to be corrected behind the wall.
- We stock Wellborn-compatible hinges, slides, and touch-up kits, and we can order exact factory matches by door label or cabinet stamp.
- High moisture exposure in Florida shortens the useful life of particleboard cabinet boxes, which is the most common failure we see in Jacksonville bathrooms.
- Written price before any work starts, and the 365-Day Done Right Promise covers the completed job for a full year.
Which Wellborn Models This Applies To
Wellborn has built bathroom lines under several names over the years, and the parts don’t all cross over. The older Sutton and Breckenridge lines, along with the Premier and Estate series, use different door profiles and hinge boring than the current Wellborn Select and Cabinetworks-era production. If you have a Wellborn vanity with a sticker inside the drawer box or on the back of a door, that label tells us the wood species, door style, and finish code we need to match a replacement front or panel. If the sticker is gone, we measure the door overlay, hinge cup diameter, and drawer box construction to pin down the series.
For Wellborn specifically, the hinge type matters more than most owners expect. Early 2000s Wellborn bathroom vanities often used a compact 35mm cup hinge with a half-overlay profile, while the newer lines moved to a full-overlay 35mm with soft-close built into the cup. Mixing those up leaves a door that looks hung wrong and never closes flush. We stock both styles, and for Wellborn drawer slides, we carry the undermount and side-mount variants that match the common box depths across their bathroom vanities.
On the OEM-versus-aftermarket question: factory Wellborn parts match the finish code exactly, but some older Wellborn finishes have been discontinued. When that happens, we source a finish-matched equivalent from a millwork supplier we’ve used for years, and we’ll tell you plainly if a spot-fix will be visible under bright bathroom light. Bradford Remodeling Co Jacksonville is an independent contractor and not affiliated with Wellborn, so we call the matches honestly and never pretend a repair is invisible when it isn’t.
Styles & brands we work with
Signs Your Wellborn Bathroom Remodeling Is Failing
- Drawer bottoms sagging or falling through at the corners. Wellborn bathroom vanities from earlier lines used a thinner drawer bottom set in a groove that softens with repeated humidity cycles. It doesn’t take much water exposure in a Jacksonville bathroom with a shower running daily before that groove opens up and the panel drops.
- Doors that won’t stay closed or hang crooked. This is almost always hinge wear or a stripped screw hole in the face frame. We regularly see doors where a homeowner kept tightening the same hinge screw until the hole wallowed out, and now the door rides low enough to scrape the bottom rail.
- Ticking or grinding when a drawer opens. The ride clips or rollers in side-mount slides wear unevenly, especially in bathroom vanities that get opened wet-handed. We notice the right side wears first on most Wellborn vanities in Jacksonville because of how people lean on the drawer while it’s open.
- Swelling or darkening along the vanity base or toe kick. Florida bathrooms create more standing moisture than almost any room in the house, and the toe kick is the first place a slow leak or splash pattern shows. By the time the laminate is peeling on the bottom rail, the box itself has often wicked water up a half inch or more.
- White residue or finish clouding on drawer fronts near the sink. That’s moisture trapped under the finish, usually after repeated exposure to soap overspray and steam. We see it most often along the bottom edge of the false front under the sink bowl.
Replacement Cost & What’s Included
A Wellborn bathroom remodel in Jacksonville typically runs between $9,000 and $28,000 installed, depending on how far the work has to reach. A single vanity replacement with new hardware, plumbing reconnection, and a sink reset sits at the lower end. A full gut of a hall bath with a new Wellborn double vanity, tile work, lighting, and a shower conversion lands at the higher end. Nothing drives that spread more than what we find when the old vanity comes out: rotten subfloor, a shutoff valve that won’t hold, or a vent stack in the wrong place all change the scope.
Every estimate is written before any work starts, with parts and labor separated so you see what the materials cost and what the crew costs. The written price doesn’t move at the door. All completed work carries the 365-Day Done Right Promise: if the repair or remodel fails within a year, we come back and correct it at no charge. That’s the whole point of getting it in writing.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
There’s a line between a quick check and a real fix, and we’ll tell you where it sits. You can safely check for a loose hinge screw, test whether a drawer catches on the same spot every time, and look under the vanity with a flashlight for water stains or delaminating laminate. What we don’t recommend is pulling a Wellborn drawer box apart to reglue a bottom panel, rehanging a door with longer screws into particleboard, or trying to shave a swollen toe kick with a chisel. Those are the repairs where we’ve seen homeowners turn a $400 hinge-and-slide fix into a full vanity replacement.
If the cabinet box has absorbed moisture, or the face frame is separated at the joint, you need a carpenter who can reset the box properly or order the right replacement front. We can match the existing Wellborn line, get the finish as close as the old coating allows, and install it so the face is flush and the reveals are even. Call (904) 337-5929 if you’d rather have someone look at it than keep adjusting a door that won’t stay put.
FAQs
With good ventilation and dry plumbing, a Wellborn vanity should give you 20 to 25 years of service in most Jacksonville homes; in a small bath with poor airflow and a daily steam shave, a cabinet box made of particleboard can start failing in 12 to 15. The door fronts usually outlast the box. The real enemy isn’t age, it’s the bathroom exhaust fan you’ve been meaning to replace. If you’re seeing bottom-rail swelling at year ten, the vanity box was likely getting wet from a drip or a splash pattern for months before you noticed. Call (904) 337-5929 and we’ll tell you whether it’s worth repairing or time to plan a replacement.
Yes, if the face frame is solid and the door fronts are intact, we can swap hinges, replace drawer slides, reset drawer bottoms, and rehang doors so the vanity runs like it should. Once water has wicked into the cabinet box or the face frame joints have opened up, a repair becomes a temporary measure in a bathroom that keeps producing heat and humidity. We’ll give you a straight answer on which side of that line your vanity sits, and the written estimate covers exactly what we’d fix and what we’d leave alone. Estimates are free at (904) 337-5929.
A single vanity swap with plumbing and finish work usually runs two to three days. A full hall-bath remodel down to the studs, with a new Wellborn double vanity, shower conversion, tile, and lighting, typically takes two to four weeks depending on what the demo reveals. Every project gets a documented scope with a schedule before a tool comes out. When the job closes, the site is clean, the scope is signed off, and you have a written guarantee in hand. Call (904) 337-5929 to schedule a free estimate.
We keep the common Wellborn-compatible soft-close hinges, drawer slides, mounting brackets, and touch-up kits on our trucks for the older Sutton and Premier lines and the current Select production. If you need a replacement door front, drawer front, or a matching vanity topper, we order it by the factory code and install it when it arrives. We also work with KraftMaid, Cambria, and Silestone when a bathroom project mixes cabinetry and stone surfaces. Call (904) 337-5929 and we’ll tell you what’s on hand and what has to be ordered.
Get a Written Estimate for Your Wellborn Bathroom Remodel in Jacksonville
If your Wellborn vanity is sagging, sticking, or swelling, and you want a real number for the repair or the full remodel, call us at (904) 337-5929. We’ll put the price in writing before any work starts, and we’ll stand behind the completed job for a full year. Curtis Lane has been managing crews across the Southeast for nearly three decades, and he runs each Jacksonville job the same way: scope it right the first time, order the right parts once, and close out with a clean site and a signed guarantee. Call today and ask for a free estimate.
Written by Curtis Lane, Owner, Bradford Remodeling Co Jacksonville, serving Jacksonville and nearby areas.
