Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Therma-Tru Bathroom Remodeling: The Jacksonville Owner’s Guide
Therma-Tru bathroom remodeling in Jacksonville typically runs $9,000 to $28,000 installed, depending on whether you’re replacing a single door-and-frame unit or tackling a full wet-area renovation with custom trim and hardware. Most Jacksonville homeowners call us when a Therma-Tru door has swollen in the humidity, the frame has started pulling away from the rough opening, or the original builder-grade installation has finally given out after years of shower steam and coastal air. We stock Therma-Tru replacement parts and match your existing model so you’re not waiting weeks for a special order.
Here’s what we see most often in Jacksonville: a bathroom door that won’t latch cleanly anymore, a frame that’s soft at the base, or glass and seals that have gone hazy from hard water and humidity cycles. Sometimes the door itself is fine and the rough opening is the problem. We figure that out before any work starts.
Key Takeaways:
- Installed Therma-Tru bathroom remodeling work in Jacksonville runs $9,000 – $28,000 depending on scope.
- Bradford Remodeling Co Jacksonville stocks Therma-Tru-compatible parts and matches existing models on-site.
- Every project gets a written price before work begins and a 365-Day Done Right Promise after.
Which Therma-Tru Models This Applies To
Therma-Tru makes several door lines that show up in Jacksonville bathrooms: the Classic-Craft, Fiber-Classic, Smooth-Star, and Pulse series, along with the Benchmark line that builders often spec for production homes. Each series uses different slab constructions, hinge prep patterns, and threshold profiles, so the wrong part can look close and still hang wrong. If your door has a manufacturer’s label on the hinge edge, it’ll tell us the series and the exact size. If the label’s gone, we measure the slab thickness, width, height, hinge spacing, and threshold drop. That’s enough to identify the correct Therma-Tru part in about ten minutes.
The OEM versus aftermarket decision matters more with Therma-Tru than with most door brands. Therma-Tru hinges and weatherstripping are engineered to their frame profiles, and aftermarket weatherstripping almost never seals the same way. For hinges, thresholds, and sweeps, we use OEM Therma-Tru parts. For trim and some hardware, quality aftermarket pieces from a documented supplier work fine and can cut cost. The Garrison Standard means every part we install gets written into the scope, so you know exactly what you’re paying for.
One compatibility gotcha worth knowing: Therma-Tru changed their glass frame designs across series over the years. A lite frame from a 2005 Classic-Craft won’t necessarily drop into a 2018 one. The glazing beads and cam assembly differ. We verify the part number against your door’s label before ordering anything.
Styles & brands we work with
Signs Your Therma-Tru Bathroom Remodeling Is Failing
- The door won’t latch in summer. Jacksonville humidity swells the slab and the frame absorbs moisture from shower steam. If the strike plate isn’t aligned to the latch, the door hangs up. The fix is usually alignment plus a frame inspection, but sometimes the jamb itself has shifted.
- Soft wood at the bottom of the door or frame. Water wicks up from the threshold and the rough opening. We see this constantly in older Jacksonville bathrooms where the original sill pan was missing or lapped wrong. The door may be fine while the rough opening is rotting behind it.
- Condensation between glass panes. That means the insulated glass seal has failed. On Therma-Tru doors, the glass lite assembly is replaceable, but the replacement has to match your series and generation. We match it on-site.
- Draft or visible daylight around the door. Weatherstripping on a bathroom door wears faster than on exterior doors because of steam and humidity cycles. It flattens, then it tears. A draft is usually a $40 weatherstrip replacement, not a new door.
- The door binds at the top or drags on the floor. This is often a hinge problem: screws stripped out of the jamb, a bent hinge leaf, or settlement in the rough opening. The slab itself is rarely the culprit. In older Riverside and San Marco homes, we see rough opening settlement more than anything.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Therma-Tru bathroom remodeling in Jacksonville runs $9,000 to $28,000 installed. That range covers a single door and frame replacement with new hardware and weatherstripping at the lower end, up to a full bathroom reconfiguration where the Therma-Tru door is one component of a larger wet-area remodel. The part itself is usually $1,500 to $4,500 depending on series, glass type, and finish. Labor, rough opening repair, trim, and finish work make up the rest.
What drives the price:
- Scope: a door swap versus a full bathroom gut with new tile, plumbing rough-in, and custom trim.
- Rough opening condition: if the framing is rotted from Jacksonville humidity, we’re repairing the opening before anything else happens.
- Series and glass package: Classic-Craft with decorative glass costs more than a Smooth-Star with a clear lite.
- Finish work: painting, casing, and threshold tile work add labor but are part of the written scope.
Every quote is a written line-item price before work starts. No numbers that move at the door. Every completed project carries the 365-Day Done Right Promise: if the door, frame, or any part of the installation fails within a year, we come back and correct it at no charge. That’s in writing, every time.
DIY or Call Us?
There are a few things a homeowner can safely check before calling. Make sure the hinge screws are tight, look for visible daylight around the weatherstripping, and run a level on the top of the door to see if the slab is cupped. Those are useful observations. What a homeowner shouldn’t do is pull a door frame out of a bathroom wall and try to re-hang it. Bathroom rough openings hide water damage, and once you pull the casing you can find anything from rotted studs to a wet substrate that needs replacing. That’s not a DIY job.
Removing a pre-hung Therma-Tru unit also involves the threshold and its seal. If that isn’t set right, water runs under the door and into the floor structure. In Jacksonville, that’s a mold problem waiting to happen. If you’ve got a door that’s stuck, binding, or leaking air, we’d rather walk you through what we see on a free estimate than have you open a wall. Call (904) 337-5929 and we’ll come out, look at the door, and give you a written price.
FAQs
With proper installation and routine weatherstripping replacement, a Therma-Tru bathroom door can last 20 to 30 years in Jacksonville. The frame usually fails before the slab, especially if the original rough opening was not flashed and sealed correctly against bathroom humidity. Call (904) 337-5929 if your frame is softening at the base.
Yes, in most cases. Weatherstripping, hinges, thresholds, and glass lite assemblies are all replaceable on Therma-Tru doors. We replace the part rather than the whole unit whenever the slab and frame are still sound. For a full assessment and a written price, call (904) 337-5929.
A single door and frame replacement with trim and threshold work takes one to two days in Jacksonville, depending on the condition of the rough opening. If we’re doing a full bathroom remodel around the door, the timeline is set in the written scope before work starts. Call (904) 337-5929 for a schedule on your specific project.
We stock common Therma-Tru hinges, weatherstripping, thresholds, and glass lite assemblies, and we can source series-specific parts quickly through our documented supplier network. If you need a match, we identify the part on-site and confirm availability same day. Call (904) 337-5929 and we’ll check your model.
Bradford Remodeling Co Jacksonville is an independent service provider and is not affiliated with or endorsed by Therma-Tru. We also stock parts compatible with KraftMaid, Cambria, and Silestone products.
Written by Curtis Lane, Owner, Bradford Remodeling Co Jacksonville at Bradford Remodeling Co Jacksonville, serving Jacksonville and nearby areas.
