Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
PGT Roofing: The Jacksonville Owner’s Guide
We stock and install PGT-compatible roofing components across Jacksonville, with most repairs running between $400 and $1,800 depending on the part and the roof’s condition. We keep common PGT flashings, sealants, and storm-damage repair materials on our trucks, so many jobs are done the same day we show up. The way homeowners usually find us is simple: a leak shows up after a hard Florida storm, or a roofer doing an inspection points to a failed boot, cracked flashing, or dried-out sealant around a PGT skylight or vent and says it needs attention before the next rain cycle.
Which PGT Models This Applies To
PGT is best known in Florida for impact-rated windows and doors, but their roofing-related envelope components – the flashing kits, curb mounts, and sealant systems that tie skylights, vents, and roof penetrations into the deck – are what we repair and replace most often around Jacksonville. The compatibility gotcha we see repeatedly: PGT’s coastal-market products are sized for the thicker roof decks common in hurricane-rated construction, which means a generic flashing from a big-box store usually sits too shallow and leaks within a year or two. We always match the part to the existing curb or penetration before touching anything. For skylight and vent work, read the PGT label on the interior frame or curb – the series code tells us immediately which flashing kit and sealant system applies. When an OEM part is backordered, we source aftermarket equivalents that match the deck thickness and curb profile rather than approximating with a universal part. That distinction is the difference between a repair that lasts and one that fails again in the spring rains.
Styles & brands we work with
Signs Your PGT Roofing Is Failing
- Water staining around a skylight or vent. In nearly every Jacksonville case we open up, the sealant has dried and cracked away from the curb. The sun here breaks down even premium sealants, and the failure usually starts at the corners where stress concentrates.
- Granules collecting in gutters near the roofline. This points to shingle wear, but around PGT penetrations it often means the flashing edge is lifting and letting water under the shingle course.
- Visible rust or corrosion on metal flashing. Salt air in Jacksonville accelerates rust on flashing and fasteners. Once the flashing starts pitting, water gets underneath and the leak follows shortly after.
- Soft decking or spongy feel around roof penetrations. That means water has been getting in for a while and the substrate is compromised. By the time you feel it inside, the repair almost always includes decking replacement, which changes the price.
- Interior paint bubbling or peeling near windows or skylights. This is trapped moisture working its way through the wall cavity or ceiling. It’s a slow leak, but slow leaks rot framing and attract mold, so we treat it as an urgent call.
Replacement Cost & What’s Included
In Jacksonville, most PGT-related roof repairs land between $400 and $1,800 installed. The low end covers single-flashing replacement with a standard curb and new sealant; the high end covers multiple penetrations, decking repair, or replacement of skylight curbs and interior trim. The range moves based on three things: whether the decking underneath is sound, how many penetrations need work, and whether we’re matching an OEM PGT part or using a spec-matched aftermarket equivalent. Every price we give is written down before work starts, and it includes the part, labor, sealant, cleanup, and a one-year written guarantee under the 365-Day Done Right Promise. If the repair fails within that window, we return and correct it at no charge. That guarantee is in writing and in your hand at closeout, along with a line-item scope so you know exactly what we did and what it cost.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
If you’re comfortable on a ladder and just want to know what you’re looking at, you can safely check for visible granule loss, cracked sealant around curb corners, and rust on exposed flashing. What you should not do is pry up old flashing, re-seat a skylight curb, or work on a roof deck you can’t see clearly from a ladder. Roof work in Jacksonville heat and afternoon thunderstorms is real risk, and a mis-seated curb leaks worse than the one you started with. We’ve fixed plenty of DIY flashing attempts where the homeowner used the wrong sealant – silicone over the top of an old asphalt-based bead – and the result peeled like tape in six months. If you want a professional to assess it, call (904) 337-5929 and we’ll walk the roof, document what’s wrong, and put a number in writing before anything gets touched.
FAQs
Most PGT flashing and sealant systems hold up 10 to 15 years under normal Jacksonville conditions, but coastal salt air and direct sun can knock that down to 8 to 10 years before sealant failure starts showing up. The metal flashing itself can last much longer if the sealant is maintained before it fails, which is why we recommend a roof-penetration inspection every couple of years after year five. Call (904) 337-5929 to schedule one – we’ll inspect and give you a written report of what’s holding and what isn’t.
Sometimes. If the flashing is sound and only the sealant has dried out, removing the old bead and properly re-sealing with a PGT-spec product buys real time. But if the flashing is rusted, lifted, or dented to the point that water is getting under the shingles, replacement is the honest fix. We’ll tell you which one applies to your roof after we see it, and you’ll get a written recommendation either way. Call (904) 337-5929 for a free estimate.
A single flashing or vent replacement on a PGT-penetrated roof usually takes 90 minutes to two hours once we’re on site, including old sealant removal, new flashing or reseat, and re-sealing. Multiple penetrations or decking repair add time, and we’ll tell you the expected window before we start. The written scope includes that timeline, so you’re not wondering when the job ends. Call (904) 337-5929 and we’ll schedule the work around your week.
We keep common PGT curb-mount kits, flashings, and sealants on our trucks for the models we most often service around Jacksonville, so many repairs are same-visit. If you have an uncommon series code or a legacy PGT product, we’ll source the correct part from our supplier network and return to install it as soon as it arrives. We also work with roofing parts compatible with other brands we support, including KraftMaid, Cambria, and Silestone for interior work. Call (904) 337-5929 with your PGT series code and we’ll check stock before you schedule.
Contact Bradford Remodeling Co Jacksonville
If your PGT roof or skylight is showing signs of trouble around Jacksonville, call (904) 337-5929. Curtis Lane and the team will put eyes on it, tell you what’s actually wrong, and give you a written price before any work begins. Scope it right the first time – the job goes a lot smoother when nobody’s surprised. We serve Jacksonville and nearby areas, and a live person answers the phone 24/7.
Written by Curtis Lane, Owner, Bradford Remodeling Co Jacksonville at Bradford Remodeling Co Jacksonville, serving Jacksonville and nearby areas.
