Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Oldcastle Kitchen Remodeling: The Jacksonville Owner’s Guide
If you’re searching for Oldcastle kitchen remodeling in Jacksonville, you’re likely dealing with a failed cabinet component, a worn countertop run, or a kitchen that’s simply stopped working the way it should. A full Oldcastle-compatible kitchen remodel in Jacksonville typically runs $14,000 – $45,000 installed, depending on footprint, materials, and what’s behind the walls. We stock and install the parts and finishes most Oldcastle kitchen owners need, and we can usually have a written price in your hand within one site visit.
Most homeowners discover the problem the same way: a drawer slide gives out, a cabinet face delaminates from Jacksonville humidity, or a countertop seam opens up after years of daily use. The Oldcastle product held up fine for a while. But Florida kitchens work hard. Heat, moisture, and cooking grease find every weak joint. At some point, patching turns into a losing game, and the real question becomes whether to repair the piece or rework the whole run.
Which Oldcastle Models This Applies To
Oldcastle has produced kitchen cabinetry and surface products across several lines over the years, and we’ve worked with most of them here in Jacksonville. The compatibility question usually comes down to three things: cabinet box construction, hinge and slide hardware, and the original countertop substrate thickness. If you have an Oldcastle kitchen from the last 15 to 20 years, chances are the cabinet boxes are either 1/2-inch or 5/8-inch furniture board with a thermofoil or painted finish. The spec matters because not every replacement door, drawer front, or hinge plate fits every generation.
A lot of homeowners go aftermarket on parts like drawer slides and hinges, and that’s usually fine, as long as the new hardware’s mounting pattern matches the existing hole spacing. We’ve seen a hundred kitchens where someone bought a $40 slide set from a big-box store, drilled new holes, and ended up with a drawer that binds or sits proud of the face frame. Oldcastle cabinetry uses standard 35mm cup hinges in most cases, but the overlay measurement matters. Bring us a door, a drawer, and a photo of the cabinet box, and we can identify what you’re working with before any tools come out. We’re an independent Jacksonville contractor, not affiliated with Oldcastle, so our job is matching what you already own, not pushing one brand’s catalog.
Styles & brands we work with
Signs Your Oldcastle Kitchen Remodeling Is Failing
- Drawer faces pulling loose or sliding unevenly. The adhesive bond on the drawer front gives way after years of humidity swings, and the mechanical slides wear unevenly from side load. You’ll feel it bind, then catch, then drop.
- Thermofoil peeling at the edges. Jacksonville’s moisture load is hard on laminate-wrapped doors, especially around cooktops and dishwashers. Once the film separates, it won’t re-bond, and the exposed substrate starts to swell.
- Soft-close mechanisms no longer soft-close. The internal dampers break down or the piston seals fail. Doors start slamming, which accelerates hinge wear and can crack the face frame over time.
- Countertop seams opening or lippage at the joints. Older Oldcastle surface runs, particularly laminate and solid surface, shift as the substrate settles. A seam wider than a thumbnail tells you the supporting structure has moved.
- Water staining or swelling at the sink base. The classic early failure point in Florida kitchens. The gasket under the sink lip fails, or the P-trap connection drips, and MDF cabinet bottoms soak up every bit of it. By the time you see the stain, the panel is usually shot.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For Oldcastle kitchen remodeling in Jacksonville, the installed price typically lands between $14,000 and $45,000. A smaller kitchen remodel, where you’re keeping the existing footprint and replacing doors, hardware, counters, and a backsplash, runs $9,000 – $20,000. Cabinet installation alone falls between $4,000 and $13,000. Countertop work, depending on material and linear footage, runs $2,000 – $6,500. Backsplash installation is $800 – $2,500, and a new kitchen island lands between $3,000 and $10,000.
What moves the number is what’s hiding behind the walls: substrate condition, plumbing rough-in locations, electrical circuits for new under-cabinet lighting, and whether the original install was square and level. Every line item goes in the written estimate before we start. That’s The Garrison Standard, and it’s the same discipline Curtis Lane runs on every Jacksonville job, from Riverside bungalows to new construction out toward the beaches. No numbers that move at the door, no change orders unless you ask for a change.
All completed work carries the 365-Day Done Right Promise: a written guarantee that if the work fails inside the first year, we come back and correct it at no charge. That’s in writing, in your hand, at closeout.
DIY or Call Us?
There’s an honest split here. If a door is loose and it’s just a hinge screw that’s stripped, get a toothpick, some wood glue, and fix it yourself. You don’t need a contractor for that. Same goes for a drawer that’s sliding uneven, you can pull it out, check the rollers and rails, and see if something fell behind the drawer box. Those are simple checks any homeowner in Jacksonville can handle on a Saturday morning.
Where DIY goes wrong is when you start disassembling cabinets or pulling countertops without knowing what’s load-bearing. Oldcastle kitchens in Florida are often installed on wood substrates that have been absorbing moisture for a decade. You pull a countertop off, and the substrate crumbles. Now you have a structural problem, not a cosmetic one. Trying to recut, relevel, and reinstall without the right tools and shims usually means buying the counter twice. Anyone who tells you this is a “simple weekend project” has never watched a thermofoil seam split in July humidity. Call us at (904) 337-5929 before you tear into it. A quick site look costs you nothing, and it’ll tell you whether you’ve got a repair or a rework on your hands.
FAQs
A properly installed kitchen remodel on a sound substrate should give you 15 to 20 years of daily use in Jacksonville’s climate, with hardware and finish touch-ups along the way. The first things to show age are usually soft-close mechanisms, door edge thermofoil, and sink-base cabinets from slow water exposure. Call (904) 337-5929 and we can tell you whether your kitchen has more life in it or if it’s time to start over.
Door hinges, drawer slides, and most hardware can be replaced individually without pulling the whole cabinet box. What usually can’t be saved is water-damaged MDF, delaminated thermofoil, or a countertop substrate that’s crumbling. We’ll give you a straight answer on what’s repairable versus what’s replaceable, with a written price either way.
Most full kitchen remodels we do in Jacksonville take 4 to 8 weeks from demo to final walkthrough, depending on cabinetry lead times, countertop fabrication, and whether we find any structural issues behind the walls. Small cabinet replacement projects can go faster, often 5 to 10 working days. We’ll give you a timeline in writing before any work starts.
We carry common 35mm cup hinges, soft-close adapters, drawer slide sets, and a range of hardware matched to Oldcastle specifications. For doors, drawer fronts, and surface materials, we order to your exact measurements and finish code. We also source and install KraftMaid, Wellborn, and other name-brand cabinet lines, so you’re never locked into one supplier for a match. Call us at (904) 337-5929 for a free estimate, and we’ll tell you exactly what’s in stock and what needs a lead time.
Scope it right the first time, the job goes a lot smoother when nobody’s surprised. That’s the way Curtis Lane and our crew run every Oldcastle kitchen we touch in Jacksonville.
Written by Curtis Lane, Owner, Bradford Remodeling Co Jacksonville at Bradford Remodeling Co Jacksonville, serving Jacksonville and nearby areas.
