Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Moen Bathroom Remodeling: The Jacksonville Owner’s Guide
Moen bathroom remodeling in Jacksonville typically runs $9,000 – $28,000 installed, depending on whether we’re swapping a failing fixture in place or gutting the room to the studs. Bradford Remodeling Co Jacksonville stocks Moen-compatible valves, cartridges, trim kits, and rough-in components, and our crews install them against a written price before any work starts. Most Jacksonville homeowners discover a Moen part has failed when the shower starts dripping, the handle gets stiff or spins past its stop, or the water temperature won’t hold steady under the hard-water conditions we see throughout Duval County.
Which Moen Models This Applies To
We work across the Moen bathroom lines most common in Jacksonville homes: the M-CORE rough-in valve system, Moentrol pressure-balancing valves, Posi-Temp shower valves, and the older Chateau and Legend series trim kits still running in Riverside and San Marco baths from the 1990s. The quickest way to identify what you have is to pull the handle and read the model number stamped on the valve body or the plastic backplate, then match it to the cartridge type: Posi-Temp takes the 1222 cartridge, Moentrol takes the 1225, and M-CORE uses a 1213 or 1214 depending on whether it’s a shower-only or tub-and-shower valve.
On OEM versus aftermarket: for Moen specifically, we stock genuine Moen cartridges and trim because Jacksonville’s mineral-heavy water chews through cheap brass substitutes fast. The aftermarket versions of the 1222, for instance, often use a softer plastic on the balancing spool, which scores within two years in hard water and starts the same drip the original failed with. That’s a false economy on a part that costs under $70 as genuine Moen.
Styles & brands we work with
Signs Your Moen Bathroom Remodeling Is Failing
- Drip that won’t stop after the handle is tightened. The cartridge seals are worn or the balancing spool is scored. Tightening the handle harder doesn’t fix it and often breaks the plastic stop ring inside the valve.
- Water temperature swings while the shower runs. The pressure-balancing mechanism inside the cartridge is seized or calcified from Jacksonville’s lime-heavy supply. You get a cold blast when someone flushes a toilet.
- Handle spins freely or goes past the normal stop position. The stem adapter or the cartridge stops have sheared, which means the valve is no longer regulating flow the way Moen designed it to.
- Low flow at the showerhead even with the valve fully open. Debris or mineral scale has packed into the cartridge inlet screens, a common problem in older Jacksonville neighborhoods with aging galvanized supply lines.
- Water leaking behind the wall or staining on the ceiling below the bath. The o-rings on the valve body or the tub spout diverter have failed, and water is running inside the wall cavity, not where you can see it.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Fixture and valve replacement work in Jacksonville lands between $3,000 and $8,500 for a shower swap or valve rebuild, while a full bathroom remodel with Moen fixtures runs $9,000 – $28,000. The spread comes down to access: a shower valve replacement with trim on an interior wall where we can work from the front is far cheaper than a tub valve buried behind tile where we have to open the wall, repair the substrate, and retile.
Every Bradford Remodeling Co Jacksonville quote includes the Moen parts at our cost, the labor to install and test them, disposal of the old fixtures, and a written scope that specifies exactly which Moen series we’re installing. No numbers move at the door. The finished work is covered by our 365-Day Done Right Promise: if any part of what we installed fails inside a year, we return and correct it at no charge.
- Cartridge and trim swap (same valve body): $400 – $900
- Shower valve replacement (front access, tile repair): $1,200 – $2,200
- Shower replacement (full valve, trim, wall repair): $3,000 – $8,500
- Full bathroom remodel with Moen fixtures: $9,000 – $28,000
DIY or Call Us?
You can safely do a few things: read the model number behind the handle, note whether the drip comes from the tub spout or the showerhead, and shut off the water supply at the shut-off valves under the sink or at the main. That information speeds up our quote. What you should not do is pull a Moen cartridge without the right puller tool and a clear understanding of how little force the plastic valve body will take before it cracks. We’ve repaired more Jacksonville showers where a homeowner’s cartridge pull tore the valve body than we have original Moen failures.
Water behind a wall is never a homeowner job. If the leak is inside the wall cavity or coming through the ceiling below, leave the water off and call us. Our people answer the phone live around the clock. Call (904) 337-5929 for a written estimate.
FAQs
With Jacksonville’s hard water, a Moen Posi-Temp cartridge typically lasts 8 to 15 years before the seals wear or mineral scale scores the balancing spool. Trim kits with exposed metal finishes last longer unless the clearcoat fails from harsh cleaners. Call (904) 337-5929 and we’ll assess what you have before anything gets torn out.
The cartridge itself is not serviceable; once the internal seals or spool are done, it gets swapped for a new genuine Moen cartridge, not rebuilt. The valve body behind it usually can be reused if it hasn’t cracked or corroded at the inlets. Call (904) 337-5929 for a straight answer on what yours needs.
A cartridge and trim swap on an accessible valve takes two to three hours. A full valve replacement that requires opening the wall, repairing the substrate, and patching the tile runs one to two days. Call (904) 337-5929 and we’ll give you a written schedule with the price.
Yes. Our Jacksonville crews carry genuine Moen 1222, 1225, and 1213 cartridges, M-CORE trim adapters, tub spout diverters, and common Posi-Temp trim kits, along with the puller and seat tools to do the job without a second trip to the supply house. We also install KraftMaid, Cambria, and Silestone products on full remodels, so one crew can handle the whole room. Call (904) 337-5929 for an exact quote, free.
Written by Curtis Lane, Owner, Bradford Remodeling Co Jacksonville at Bradford Remodeling Co Jacksonville, serving Jacksonville and nearby areas.
