Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Jacksonville Homeowners Choose KraftMaid Construction
We provide independent KraftMaid construction, repair, and installation service across Jacksonville, FL, from full kitchen gut-outs in Riverside to cabinet refacing in Bartram Park. Our crews rebuild and re-trim KraftMaid kitchens the way they actually fail in this humidity: swollen sink bases, drifted full-overlay doors, snapped shelf clips. We are not a KraftMaid dealer and we are not authorized by the manufacturer. We are a Jacksonville General Contractor that has worked inside KraftMaid cabinets since the early 2000s, and we quote the job from the installed reality of those boxes, hinges, and finishes, not from a showroom brochure. Call (904) 337-5929 for a written estimate.
Why Trust Bradford Remodeling Co Jacksonville for Your KraftMaid Construction?
Curtis Lane, our owner, learned the trade at Los Angeles Trade-Technical College and has spent three decades managing crews across the Southeast. His rule has always been the same: lock the scope before the first nail goes in. That matters on KraftMaid work because the cabinets arrive in flat boxes, and the difference between a kitchen that looks right and one that fights you for fifteen years is in the shimming, squaring, and reveal-setting on install day. We know which KraftMaid face frames drift in a Jacksonville summer and which hinge adapters hold a full-overlay door in spec through August. Every project we complete carries the 365-Day Done Right Promise: if the work fails inside a year, we come back and fix it at no charge. The written price you approve before we start is the price you pay at closeout. No numbers that move at the door.
Styles & brands we work with
Common KraftMaid Construction Problems We Fix in Jacksonville
These are the failures we see repeatedly in Jacksonville homes. The humidity, the afternoon thunderstorms, and the dishwasher steam all do specific things to KraftMaid cabinets. Here is what actually happens:
- Face frames pulling away from the box at the stile-to-rail joint. On framed KraftMaid lines like Vantage and Braelyn, the joints at the front of a base cabinet carry constant stress. Years of humid summers and frequent sink-base moisture exposure weaken the factory glue and staple joints until the frame starts to separate. The cabinet box is usually still square; the face frame is not. We re-secure the joint, re-square the frame to the box, and re-seat the doors so the reveal runs even.
- Adjustable shelf clips breaking inside tall pantry cabinets. KraftMaid’s adjustable shelves ride on plastic or stamped metal clips that were never sized for the weight homeowners actually put on them. Store a stand mixer, a stack of ceramic dishes, or a set of Dutch ovens in a pantry cabinet, and the clip eventually snaps or bends out of its hole. We replace broken clips with heavier-duty aftermarket versions that fit the same 5mm hole pattern, so the shelf stays adjustable without weakening the cabinet side.
- Full-overlay Vantage doors drifting out of alignment. The soft-close cup hinges on full-overlay KraftMaid doors lose tension over time. Jacksonville’s humidity makes it worse because the MDF or plywood door panel swells slightly, and the hinge is no longer holding the same geometry it was set to. The door starts to rub the adjacent door or the face frame. We re-tension or replace the hinge cartridge and re-set the door so the gap around all four edges is even.
- Thermofoil edges peeling on older KraftMaid sedona slab doors. Heat and steam from dishwashers and ranges eventually lift the thermofoil layer at the bottom edge of slab doors. Once the edge lifts, moisture gets underneath and the peeling accelerates. We can sometimes re-adhere a small lift with a heat re-bond process if the substrate is sound. When the peeling covers a large area or the MDF core has swelled, we replace the door or door front rather than trying to glue a failing surface.
- Drawer glides worn out on heavily used base cabinets. The under-mount soft-close glides KraftMaid installed in kitchens built before roughly 2015 were solid but not indestructible. A pot-and-pan drawer that gets opened forty times a day will eventually lose its soft-close action or develop side-to-side slop. We replace glides with factory-spec or better aftermarket units and set the drawer face so the gap is consistent with the rest of the run.
KraftMaid Parts & Our Repair-vs-Replace Approach
We match KraftMaid’s current hinge and drawer glide specifications from factory cross-reference when the cabinet line is still in production. Where factory parts are discontinued or cost more than they should, we use quality aftermarket soft-close adapters and shelf clips that fit the same mounting pattern. The aftermarket parts we stock locally in Jacksonville are the ones we have tested and will warranty for the same year as the rest of the project. Here is our honest repair-vs-replace rule: if the boxes are square and the finish is sound, we repair. We do not sell a new kitchen for a hinge problem. That rule applies to any face frame or hinge issue on cabinets built after 2010. A swollen sink base side panel gets replaced with a new plywood panel cut to match, not a whole new cabinet. If you want a straight read on what needs repair versus what needs replacement, call (904) 337-5929 and we will look at the job.
Our KraftMaid Service Process – Step by Step
Every KraftMaid job we run in Jacksonville follows the same sequence. It keeps the work predictable and the price firm.
- 1
Diagnosis and written scope. We inspect the cabinets, doors, hinges, glides, and any water-damaged substrate. Then we write the scope: what is being repaired, what is being replaced, what parts we are using, and what it costs. You approve it before we order anything.
- 2
Repair or install. For repairs, we re-square, re-secure, re-tension, or replace the specific components in the scope. For installations, we level the base run, shim where the floor is out, fasten through the cabinet sides, and set doors and drawer fronts with consistent reveals. We do the same work whether the line is Vantage, Braelyn, Durham, or Lyndale.
- 3
Test and adjust. Every door opens and closes under soft-close, every drawer slides without binding, every clip holds weight, and every frame joint is tight. We run the doors through several open-close cycles to make sure the hinges are set where they will live, not where they happened to land.
- 4
Warranty hand-off. At closeout you get a signed copy of the 365-Day Done Right Promise. If anything we touched fails inside that year, we come back and fix it at no charge. The site is clean, the scope is documented, and the written guarantee is in your hand.
See the difference
Before
After
Before
After
Before
AfterKraftMaid Products We Service & Install in Jacksonville
We work on the full range of KraftMaid lines that have passed through Jacksonville homes over the last two decades. That includes the Vantage framed line in full-overlay and inset door configurations, the Braelyn framed line with its recessed center panel, the Durham framed beaded inset line, and the Lyndale frameless slab line. We also service the older builder-grade stock and the discontinued thermofoil slab doors that turn up in early 2000s production homes around Arlington and the Southside. Our install crews can order KraftMaid for new kitchens and major remodels, or work with cabinets you have already purchased. Let us know what line you are looking at and we will tell you what we have seen from it in the field.
We Also Service These Brands
KraftMaid is a big part of our cabinet work, but it is not the only line we touch. We install and service Cambria and Silestone countertop surfaces, Kohler and Toto fixtures, and cabinet lines from other major manufacturers. If your Jacksonville kitchen or bath mixes brands, we handle the whole room without passing you off to another contractor.
FAQs – KraftMaid Construction Service in Jacksonville
No. We are an independent Jacksonville contractor that services and installs KraftMaid cabinets, not a KraftMaid authorized dealer or repair center. We do not speak for the manufacturer. What we bring is field experience: our crews have worked inside KraftMaid kitchens across Jacksonville for two decades, and we know these boxes from the installed side, not the showroom side. The manufacturer warranty on new KraftMaid cabinets remains between you and KraftMaid; our 365-Day Done Right Promise covers the work we perform.
We use factory-matched KraftMaid parts when the cabinet line is still in production and the part is available at a sensible price. Hinges, drawer glides, and shelf clips on current production lines can be cross-referenced to exact factory spec. Where KraftMaid has discontinued a part or the factory price is unreasonable, we use aftermarket soft-close adapters and clips that fit the same mounting pattern and hold up under Jacksonville humidity. We will tell you which parts we are quoting and why before we order. Call (904) 337-5929 with your cabinet line and we will check part availability.
Often yes, but it depends on the door style and how long the line has been out of production. We can have a replacement door made to match the profile, finish, and hinge boring of your existing KraftMaid door for many discontinued styles, including older thermofoil and recessed-center-panel doors. The match is never perfect on a cabinet that has been in a Jacksonville kitchen for ten years, because the original finish has aged under sun and humidity. But a door made to the same profile and stained to blend is usually a far better result than replacing a whole run. Bring us a door sample or a photo and we will tell you honestly whether a match is practical.
No. A failed soft-close hinge is a hinge problem, not a cabinet problem. We replace the hinge cartridge or the full hinge, re-tension the new mechanism, and re-set the door so the reveal is even. This is one of the most common KraftMaid repairs we make in Jacksonville, and it typically takes under an hour per door. If the hinge cup has wallowed out its hole in the door, we re-bore and insert a repair bushing. The only time a hinge problem points toward replacement is if the door itself has swelled or split. Call (904) 337-5929 and describe the hinge; we will give you a price range over the phone.
Wood and wood-composite doors swell in Jacksonville’s summer humidity. A door that was set with a tight reveal in January will sometimes kiss the frame or the adjacent door in August. On full-overlay Vantage and Braelyn lines, the fix is a hinge adjustment: we adjust the cup hinge screws to move the door slightly away from the rub point, then re-set the adjacent doors so the whole run stays even. If the door has taken on permanent moisture and will not hold adjustment, the underlying issue is usually poor ventilation or a nearby steam source, and we will point that out rather than just chasing the door. This is a known Kraftmaid in Jacksonville Beach condition, not a defect in your cabinets.
The answer is specific to how far the peel has run. A small edge lift of a quarter inch or less can sometimes be heat-bonded back down if the MDF core has not swelled. Once the peel runs several inches and the core is soft or swollen, re-bonding will not hold, and replacement doors are the honest fix. When we replace thermofoil doors, we match the color and profile as closely as production allows and set the new doors to the existing hinges. We will not sell you a full door replacement for a peel that can be arrested. Call (904) 337-5929 for an exact quote. Estimates are free, and the price we write is the price you pay.
Yes. Inset door configurations are orderable through KraftMaid’s Vantage and Durham lines, even if the Jacksonville showrooms you have visited mostly display full-overlay samples. Inset doors sit flush inside the face frame instead of covering it, which changes the look and the hinge hardware. We quote inset kitchens regularly, and we will walk you through the door reveal, hinge, and clearance considerations before you order. The lead time is typically a little longer than full-overlay, and we will factor that into the project schedule up front.
Here are the price ranges we quote on KraftMaid work in this market. The spread reflects kitchen size, cabinet line, and whether we are installing new boxes or refacing existing ones.
| Service | Jacksonville Price Range |
|---|---|
| Full Kitchen Remodel with KraftMaid cabinets | $14,000 – $45,000 |
| Cabinet Installation (labor only, KraftMaid) | $4,000 – $13,000 |
| Cabinet Refacing (KraftMaid doors/drawer fronts) | $5,000 – $18,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
These are written-estimate ranges, not bait prices. We quote the job after we see the kitchen, and the number on that written estimate is the number on your final invoice. No additions at the door. Call (904) 337-5929 to schedule a free estimate.
Book Your KraftMaid Service in Jacksonville, FL
If you have a KraftMaid kitchen that needs Neptune Beach Kraftmaid service, call (904) 337-5929 for a free estimate. We will inspect the cabinets, give you a written price, and stand behind the work for a full year. Scope it right the first time, the job goes a lot smoother when nobody’s surprised.
Written by Curtis Lane, Owner at Bradford Remodeling Co Jacksonville, serving Jacksonville since 2004.
