Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Quikrete Fence Installation: The Jacksonville Owner’s Guide
Quikrete fence installation in Jacksonville typically runs $3,500 to $9,000, depending on the linear footage, the number of gate posts, and whether the concrete is being set into clay or sandy soil. We stock Quikrete Fast-Setting Concrete Mix on our trucks and can usually schedule the post-setting work within a week of your call. Most owners discover they have a problem when a gate starts dragging, a post leans after a hard rain, or the concrete collar at the base of a post cracks and pulls away from the wood.
What most homeowners don’t realize is that Quikrete itself rarely fails. The failure is almost always in the hole: wrong depth, wrong diameter, or concrete poured into standing water. In Jacksonville, where the water table sits high and summer thunderstorms hit hard, a post hole that wasn’t prepped right will heave within two seasons.
Which Quikrete Models This Applies To
Quikrete doesn’t make fence posts or fence panels. Quikrete makes the concrete products that anchor the fence in the ground. The products we work with most often for fence installation are Quikrete Fast-Setting Concrete Mix (the red bag), Quikrete 5000 High Early Strength Concrete Mix, and Quikrete Crack-Resistant Concrete Mix. Each one behaves differently in Jacksonville’s soil.
Fast-Setting sets in 20 to 40 minutes and is what we use for gate posts and corner posts where you need the post to hold fast while the rest of the fence goes in. Quikrete 5000 reaches 5,000 psi and is the right call for taller privacy fences that catch wind, particularly south of I-10 where storms come off the Gulf unobstructed. Crack-Resistant has fiber reinforcement and resists the micro-shrinkage that causes the concrete collar to pull away from the post face over time.
One compatibility gotcha to flag: the red Fast-Setting bag is engineered for posts set directly in the hole, no premixing in a wheelbarrow. If you’re replacing a post in an existing fence line, the hole tends to be smaller than a new install, and we’ve seen plenty of homeowners overfill a narrow hole with a mix that doesn’t hydrate evenly. The result is a concrete plug with dry pockets that crumbles under gate load within a year.
Styles & brands we work with
Signs Your Quikrete Fence Installation Is Failing
- Post lean after heavy rain. The concrete collar is intact but the hole was dug too shallow or too narrow for the post diameter. In Jacksonville’s sandy stretches along the Westside, posts need to go 30 to 36 inches deep, not the 24 inches some handymen use.
- Concrete collar cracking at the surface. This is usually from concrete mixed too wet or poured into a hole with standing water, which weakens the mix at the bottom where the post sits.
- Gate sagging or dragging. The hinge post is moving inside the concrete, or the concrete plug itself is tilting in the hole. Gate posts take constant dynamic load, and this is where we see most fast-setting mix failures in Duval County.
- Water pooling around the post base. The concrete was crowned too low, so water sits against the post and rots the wood just above ground line. A proper install leaves the concrete mounded half an inch above the soil line so water sheds away.
- Fence racking in the wind. The whole fence line shifts when a gust comes through, meaning the end posts and corner posts weren’t set deep enough or the concrete didn’t fill the hole completely.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For a Quikrete fence installation in Jacksonville, the installed price runs $3,500 to $9,000. At the lower end, you’re looking at a shorter run with standard 4×4 posts and a single gate. At the upper end, you have a long property line, 6×6 corner and gate posts, maybe a double gate, and concrete removal if an old fence has to come out first.
Here’s how the numbers break down:
- Concrete and post materials: $350 to $1,100 depending on post count, diameter, and depth.
- Labor for excavation, posting, and concrete work: $1,800 to $4,800 for a typical suburban yard.
- Fence panels, rails, and hardware: $1,200 to $2,900 depending on wood grade, height, and gate hardware.
- Old fence removal and haul-off: $150 to $900 depending on how much is coming out.
Every line item goes on a written price before the first shovel goes in the ground, and every project carries our 365-Day Done Right Promise. If the fence shifts, the concrete fails, or a gate goes out of square inside the first year, we return and correct it at no charge.
DIY or Call Us?
Post-setting concrete work isn’t dangerous the way electrical or roofing work is, but it’s labor-heavy and unforgiving of shortcuts. What a homeowner can reasonably check on their own is the visible concrete collar: cracks, gaps between concrete and post, and whether water pools at the base. That’s a weekend inspection.
Where DIY goes wrong in Jacksonville is the hole. Digging 30-plus inches through clay, roots, and the occasional limestone shelf is a long day. Then you’re setting a post plumb in a narrow hole, pouring the right amount of a fast-curing product, and bracing it while it sets, all before the afternoon thunderstorm rolls in. We’ve fixed enough DIY fence posts along the Southside to know the pattern: the post looks straight the first week, the first hard rain finds the dry pockets and the short hole, and by month six the fence is leaning and the gate won’t latch. If you’d rather not do it twice, call (904) 337-5929 for a written quote.
Everything You Need to Know About Quikrete Fence Installation in Jacksonville
How long does a Quikrete fence installation last in Jacksonville?
A properly set Quikrete fence post installation in Jacksonville lasts 15 to 25 years; what fails first in our climate is not the concrete but the wood post if water is allowed to pool at the base. The concrete collar itself, when mixed and placed correctly, will outlast the fence. Give us a call at (904) 337-5929 for a written quote.
Can a leaning fence post be repaired instead of replaced?
Yes, if the post is still sound, we can reset it by removing the old concrete, re-digging the hole to the correct depth, and setting the post in fresh Quikrete Fast-Setting Concrete Mix. If the post is rotted or cracked, replacement is the honest answer. We’ll tell you which one you have during the estimate, and the price won’t change once work starts.
How long does a fence post replacement take?
A single-post replacement with Quikrete Fast-Setting Concrete Mix takes about two to three hours from set-up to final brace, and the post is ready for panel attachment the same afternoon. A full fence line with multiple posts is typically a one-to-two-day job depending on the length and the Jacksonville weather. Call (904) 337-5929 and we’ll put a schedule in writing.
Do you stock Quikrete products in Jacksonville?
We stock Quikrete Fast-Setting Concrete Mix, Quikrete 5000, and Crack-Resistant Mix on our trucks, so we’re not chasing bags across town the morning of the job. If you’re replacing an older fence, we’ll bring the right mix for your post size and soil conditions, not whatever is closest to the truck door. Estimates are free; call (904) 337-5929 to schedule one.
Written by Curtis Lane, Owner, Bradford Remodeling Co Jacksonville, serving Jacksonville and nearby areas.
