Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Unilock Kitchen Remodeling: The Jacksonville Owner’s Guide
Unilock kitchen remodeling in Jacksonville typically runs $14,000 to $45,000 installed, depending on scope, material grade, and whether we’re working around existing Unilock hardscape tie-ins. We stock Unilock-compatible kitchen materials and components in Jacksonville and can usually schedule a site assessment within a couple of business days. Most homeowners call us because an existing Unilock paver surface at the kitchen transition is failing, or they’re trying to match an indoor-outdoor kitchen setup to a Unilock patio and keep getting told it can’t be done cleanly.
It can. The dry observation I’d add: most of these jobs go sideways because nobody verified the base under the Unilock surface before the kitchen work started. Scope it right the first time, the job goes a lot smoother when nobody’s surprised.
Which Unilock Models This Applies To
Unilock runs several paver and wall product lines, and the compatibility picture changes depending on what’s already in your yard. For kitchen remodels that tie into a Unilock patio, walkway, or retaining wall, the most common Jacksonville installations we work around are Estate, Richcliff, Thornbury, Brussels Block, and Old Greenwich paver lines, plus Lineo Dimensional Stone for vertical surfaces like outdoor kitchen island faces and seating walls.
The load-bearing distinction matters more than the color name. Estate pavers run 60mm to 80mm thick, which means they’ll carry the weight of a stone countertop overhang and cabinet bases better than a thin tile. Thornbury and Brussels Block can work for the kitchen floor surface itself, but only when the base is compacted properly for both pedestrian and cabinet load. If the existing pavers measure under 60mm, they were almost certainly installed for foot traffic only, and we’ll need to replace the section under the kitchen footprint with a heavier-spec product.
Here’s the compatibility gotcha: Unilock colors shift between manufacturing batches. We match by batch code from the original pallet label when you’ve kept one, or by taking a sample to match against current runs. If the old pavers have been in the Jacksonville sun for five-plus years, no new pallet will match perfectly at install. We tell owners this up front so the transition zone gets designed accordingly.
On OEM versus aftermarket: Unilock doesn’t make kitchen cabinets, countertops, or fixtures. Unilock makes the exterior hardscape. The kitchen components we install alongside Unilock come from our documented brand roster, including KraftMaid and Wellborn for cabinetry, Cambria and Silestone for surfaces, and Kohler and Moen for fixtures. Those manufacturers carry their own specs and warranties. The Unilock product carries ours, through the 365-Day Done Right Promise.
Styles & brands we work with
Signs Your Unilock Kitchen Remodeling Is Failing
- Pavers shifting under the kitchen footprint. This usually means the original base wasn’t deep enough for Jacksonville’s sandy soil, or wasn’t compacted with enough water and passes. Cabinets start tilting, countertops crack at the seam. We see it most often in older Mandarin and Orange Park builds where the patio was poured or laid as a weekend project.
- Water pooling at the kitchen-to-paver transition after rain. Jacksonville storm patterns punish uneven substrates fast. If water is standing against the cabinet base or soaking into the wall system, the fix is grading and drainage correction before any cosmetic work. Spackling over it won’t hold.
- Erosion under the outer pavers. The edges go first. When the sand bedding washes out, pavers drop, and the whole kitchen surface starts to migrate.
- Efflorescence or salt staining on vertical Unilock surfaces behind a built-in grill or sink. That white crust tells you water is moving through the wall from behind. Could be missing flashing, could be failed sealant. We trace it before assuming it’s cosmetic.
- Cabinet or island framing pulling from the wall. This is structural. It means the original ledger and anchoring weren’t rated for Jacksonville’s humidity-and-sun expansion cycles, and now you’ve got a slow-motion separation happening.
Curtis Lane has seen hundreds of these failures in the Southeast. The one that costs owners the most is the third one on the list, because by the time it’s visible, the substrate is already shot and we’re resetting from the base up.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s the installed pricing picture in Jacksonville, straight numbers.
| Scope of Work | Typical Installed Range |
|---|---|
| Full Unilock kitchen remodel (cabinets, countertops, hardscape base, utilities) | $14,000 – $45,000 |
| Kitchen remodel without structural base correction | $14,000 – $28,000 |
| Base rebuild / compaction correction under Unilock pavers | $3,000 – $10,000 |
| Countertop installation only (Cambria, Silestone, or equivalent) | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island construction on Unilock surface | $3,000 – $10,000 |
What drives the range: whether the existing Unilock base is load-bearing or needs a rebuild, how many linear feet of cabinetry, whether we’re running new gas, electrical, or water lines to the island, and whether the hardscape needs batch matching. Every estimate comes as a written line-item price before any work starts. No numbers move at the door. The 365-Day Done Right Promise covers the installed work for one full year, in writing. If something fails inside that window, we return and correct it at no charge.
DIY or Call Us?
What you can safely check yourself: whether pavers are visibly sunken, whether water pools after a hard rain, and whether cabinet doors are binding (that’s a settling signal). What you shouldn’t attempt on your own: resetting pavers under a load-bearing kitchen structure, re-grading the base, or running new gas and electrical to an outdoor kitchen. Gas lines and electrical work are genuinely dangerous when done wrong, and Jacksonville building codes are specific. A gas leak or an improper ground is not the kind of mistake you get to do twice.
If the only issue is cosmetic staining on vertical Unilock surfaces, resealing is usually a reasonable homeowner task. If anything is moving, separating, or holding a grill, sink, or countertop, call us at (904) 337-5929. We’ll give you an honest read on whether it’s a base problem or a simpler fix. The estimate is free.
FAQs
A properly built Unilock kitchen with a compacted base, correct drainage, and sealed transitions will hold structurally for 20-plus years in Jacksonville’s climate, though surface resealing is typically needed every three to five years. If the base was done wrong, failures show up in the first two years. Call (904) 337-5929 for an on-site assessment and we’ll tell you which situation you’re in.
Yes, when the failure is limited to edge erosion, a few sunken pavers, or cabinet hardware, we can repair the specific problem without a full remodel. When the base under the kitchen footprint has failed, repair means rebuilding that section anyway, and at that point a partial remodel is usually the smarter money. Call (904) 337-5929 and we’ll look at what’s actually failing before anyone suggests a bigger job.
A focused repair runs one to three days. A full kitchen remodel with base correction, utility runs, cabinetry, and countertops typically runs four to ten weeks depending on permitting and material lead times. We lock the schedule in writing before we start, and the written price doesn’t change unless you change the scope. Call (904) 337-5929 to schedule a site visit.
We maintain relationships with Jacksonville-area Unilock distributors for pavers, wall units, and edging, and we keep a truck stock of standard base materials, flashing, sealants, and anchoring hardware for kitchen work. For specific Unilock color batches we order to match your existing product. We also order KraftMaid, Cambria, Silestone, Kohler, and Moen materials on a per-project basis so the brands are documented and covered by their manufacturer warranties. Call (904) 337-5929 to confirm availability for your project.
Bradford Remodeling Co Jacksonville is an independent remodeling contractor, not affiliated with Unilock. We install and work around Unilock products, and we stand behind our work through the 365-Day Done Right Promise regardless of whose materials are on the job.
If your Unilock kitchen is showing signs of base failure, settlement, or water trouble in Jacksonville, call (904) 337-5929. We’ll come out, look at what’s actually failing, and put a written price in your hand before any work begins. Live person answers, 24/7. That’s The Garrison Standard.
Written by Curtis Lane, Owner, Bradford Remodeling Co Jacksonville at Bradford Remodeling Co Jacksonville, serving Jacksonville and nearby areas.
