Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ES Windows Kitchen Remodeling: The Jacksonville Owner’s Guide
If you’re reading this, the ES Windows component in your kitchen has likely failed or is showing signs of it, and you need a straight answer on what it costs to fix. A full ES Windows kitchen remodeling project in Jacksonville typically runs between $14,000 and $45,000 installed, depending on window count, sizing, and how much surrounding structure needs work. Owners most commonly discover the problem the hard way: condensation between panes, a sash that won’t stay up, or water staining on the drywall below the window after a hard Florida rain.
We’re Bradford Remodeling Co Jacksonville, and we work on ES Windows kitchen projects throughout the Jacksonville area. We are an independent contractor, not affiliated with ES Windows. We do this work by the book: written scope, written price, and a one-year guarantee on every job we close.
Which ES Windows Models This Applies To
ES Windows produces several product lines that end up in Jacksonville kitchens: the ES Pure line (impact-rated aluminum frames common in coastal Florida construction), the ES Vista series (double-pane, thermally broken frames), and the ES Eco line (budget-conscious vinyl and aluminum hybrids). The kitchen remodels we handle most often involve the ES Pure and ES Vista families, primarily because those are the units spec’d for homes built or renovated after Florida’s post-Andrew building code changes went into effect.
Here’s the compatibility gotcha most owners don’t know until a remodel stalls: ES Windows uses proprietary frame extrusions, so a replacement sash from another manufacturer will almost never seat correctly in an existing ES frame. The glass pack and seal assembly can be rebuilt by a qualified glazier using high-quality aftermarket materials, but the frame itself, the balance system, and the lock hardware should be ES-specific or from a known-compatible fabricator. We identify the exact model from the aluminum spacer label etched inside the glass or from the frame sticker on the hinge-side jamb. If that label is gone, we measure the glass pack thickness and frame depth to cross-reference against ES build sheets.
For OEM versus aftermarket: ES factory parts are available through regional distributors serving Florida, but lead times can run two to four weeks. We carry common aftermarket glass packs, balance springs, and weather seals on our trucks that meet or exceed the original spec for Jacksonville’s humidity and salt-air exposure. We’ll tell you which route fits your window before any work starts.
Styles & brands we work with
Signs Your ES Windows Kitchen Remodeling Is Failing
- Condensation or haze between the glass panes. The gas-filled seal between the panes has failed. In Jacksonville’s summer humidity, a broken thermal seal also means the window is no longer doing its job against heat transfer, and the glass will start to look permanently fogged.
- A sash that drops or won’t stay open. The balance spring or block-and-tackle assembly inside the frame has worn out. This is one of the most common ES window failures we see in kitchens with windows over the sink that get opened daily.
- Hard cranking or a hand crank that slips. The operator mechanism on casement-style ES units is a known wear point, especially in kitchens where cooking grease and coastal humidity work together to gum up the gears.
- Water staining on the wall or ceiling below the window. This is often a failed frame seal or improper flashing from the original install. In Jacksonville’s storm season, water intrusion around a kitchen window will rot the buck frame and the substrate faster than most people expect.
- Visible frame corrosion or pitting on aluminum surfaces. Florida’s coastal air is brutal on unprotected aluminum. If the factory finish has worn through, the frame will continue to corrode and the window becomes a weak point in both weather protection and structural integrity.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For a full kitchen remodel involving ES Windows replacement or repair, Jacksonville homeowners should budget between $14,000 and $45,000. The spread is wide because the job varies so much: a single Picture window replacement over the sink with minor trim work sits at the low end, while a full kitchen gut involving multiple ES window replacements, new cabinetry, countertops, and a structural reframe for a wider window opening runs toward the top.
Here’s the line-item breakdown for window-specific work within a kitchen remodel:
- Single ES window glass pack replacement: $400 – $900 per window, including new thermal seal, gas fill, and reinstallation.
- Single ES window full sash replacement: $800 – $1,800 per window, depending on size and whether it’s impact-rated.
- Full ES window unit replacement (frame and all): $1,500 – $4,500 per window, including removal, flashing, and finish trim.
- Kitchen cabinetry rework around windows: $4,000 – $13,000, depending on scope, using KraftMaid or Wellborn lines.
- Countertop replacement (if water damage reached the deck): $2,000 – $6,500, using Cambria or Silestone surfaces.
- Backsplash rework after window frame repair: $800 – $2,500.
Every quote we give is written and includes all labor, materials, and a workmanship warranty under our 365-Day Done Right Promise. If the window work fails within one year of completion, we come back and correct it at no charge.
DIY or Call Us?
There are a couple of things you can safely check on your own. Look at the window label on the hinge-side jamb to confirm the model series, and take a photo of any condensation or staining before it dries, because that documentation helps us narrow down the failure mode. You can also wipe down the tracks and check that debris isn’t blocking the sash from seating fully, which sometimes causes a window to hang up and feel like a balance failure when it isn’t.
What you should not do is attempt to disassemble an ES balance spring system or remove a gas-filled glass pack on your own. The springs are under tension, and a wrong move with a pry bar can launch a metal component through the room. The same goes for any water-damaged frame work: by the time you see staining, there’s often hidden rot in the substrate that needs to be cut out and replaced correctly, not caulked over. If the damage has reached the point where trim, drywall, or cabinetry has to come out, call us at (904) 337-5929. The inspection is free, and we’ll give you a written price before anything gets touched.
FAQs
ES Windows in Jacksonville typically last 18 to 25 years for the frame and hardware, while the thermal seal on the glass pack often fails between 10 and 15 years due to the region’s heat, humidity, and UV exposure. Coastal homes within a few miles of the Intracoastal tend to see faster corrosion on aluminum frames if the factory finish has been scratched or worn. If your kitchen window is past year 12 and showing haze between the panes, it’s time for a glass pack replacement before water intrusion starts.
In most cases, the glass pack, balance system, and weather seals can be repaired or rebuilt without replacing the entire window, and that’s the path we take when the frame is still sound. Full replacement only becomes necessary when the frame itself is rotted, corroded through, or distorted from a failed install. Call (904) 337-5929 for a free inspection and we’ll tell you which side of that line your window falls on.
A single glass pack replacement or sash repair typically takes one day on site, while a full window unit replacement with new flashing and trim generally runs one to two days, with a short wait for materials if we need to order ES-specific hardware. A full kitchen remodel that includes multiple window replacements, cabinetry, and countertops usually runs three to six weeks depending on scope. We’ll put the timeline in writing with the price, and we schedule around your kitchen’s usable window so you’re not cooking in a construction zone any longer than necessary.
We keep common aftermarket glass packs, balance springs, weather seals, and lock hardware on our trucks that are compatible with the most common ES Pure and ES Vista series units installed in Jacksonville homes. Factory ES-specific parts, like certain casement operators and proprietary frame components, typically have a two-to-four-week lead time through Florida distributors. We’ll present both options with their prices and give you the tradeoff decision in clear terms before we order anything.
Scope it right the first time – the job goes a lot smoother when nobody’s surprised.
If your ES Windows kitchen project is showing signs of failure, or you’re planning a remodel and want the windows handled correctly as part of the scope, call us at (904) 337-5929. Curtis Lane and the team at Bradford Remodeling Co Jacksonville will give you a straight answer, a written price, and a job that’s squared away before we leave the site.
Written by Curtis Lane, Owner, Bradford Remodeling Co Jacksonville, serving Jacksonville and nearby areas.
