Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CWS Fence Installation: The Jacksonville Owner’s Guide
A complete CWS fence installation in Jacksonville typically runs $3,500 – $9,000, installed, with most residential projects landing between $4,500 and $7,000. We stock CWS-compatible components and can typically begin work within a week of the written estimate. If your CWS fence is sagging, leaning, or the gate no longer closes square, you’re looking at a structural issue with the posts, rails, or concrete footings – not a cosmetic one.
Most Jacksonville homeowners discover a CWS fence problem after a storm. Northeast Florida gets wind and rain that fences in drier climates never see. The ground heaves with the wet-dry cycle, the concrete around posts cracks, and suddenly a fence that looked fine in March is leaning toward the property line by August. By the time you notice the lean, the post has usually been moving for weeks.
Which CWS Models This Applies To
CWS manufactures fence systems across several product lines, but in Jacksonville the most common installations we service are the residential aluminum, vinyl, and a smaller number of composite privacy systems. The important compatibility point: CWS posts, rails, and pickets are engineered as a system, not as interchangeable parts from the big-box aisle. A post designed for CWS aluminum rail won’t carry the load of their heavier privacy panels without sagging at the top rail connection.
To identify your fence, look for the manufacturer label on the inside face of the post cap or the back of the gate frame. If the label is worn or painted over, measure the post footprint – CWS residential posts are typically 2″ x 2″ or 2.5″ x 2.5″ for aluminum lines, and 5″ x 5″ for solid vinyl privacy. We keep OEM CWS components in standard sizes, and for discontinued series we’ll spec a quality aftermarket equivalent that matches the rail profile and post gauge. Jacksonville’s coastal air means aluminum components need a factory-applied powder coat – bare mill-finish aluminum will pit within two years here.
Styles & brands we work with
Signs Your CWS Fence Installation Is Failing
- Post lean or wobble. This means the concrete footing has cracked or the post wasn’t set deep enough for Jacksonville soil. A post that moves when you push it has already lost structural load transfer, not just aesthetics.
- Gate drags or won’t latch. The gate frame has racked, usually because the hinge post is moving or the hinges themselves have worn at the pin. Dragging is the first sign; a gate that won’t close is a week or two behind.
- Rails pulling out of posts. The rail bracket screws have stripped or corroded. Near the Intracoastal or beaches, salt air accelerates bracket corrosion on aluminum and even stainless hardware.
- Warped or cracked pickets. In vinyl systems, this is usually a heat-expansion issue when the panels were installed without the manufacturer’s required expansion clearance at the posts. Jacksonville’s summer sun will warp a vinyl panel that was screwed tight in January.
- Pool cage or enclosure gate binding. CWS also manufactures railings and enclosures for pool cages, and the hinge alignment spec is tighter than residential fence. A binding gate here is often a post that shifted in the deck socket.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For a full CWS fence installation, Jacksonville pricing breaks down as follows:
- Vinyl privacy fence (full install): $3,500 – $9,000 depending on linear footage, panel height, and gate count
- Aluminum rail or picket system: $4,000 – $10,000 installed
- Post replacement and reset (single post): $350 – $800 including new concrete footing
- Gate replacement or re-hang: $400 – $1,200 depending on gate width and frame material
- Rail and bracket repair: $25 – $75 per linear foot, parts included
What drives the range: linear footage, post spacing, gate count, and whether we’re setting posts in new concrete or resetting existing footings. A 150-foot yard with two gates in Mandarin will price differently than a 40-foot side yard in Riverside. You get a written line-item price before any work starts – no numbers that move at the door. Every installation carries our 365-Day Done Right Promise: if the work fails inside a year, we return and correct it at no charge. That’s The Garrison Standard, in writing, from day one.
DIY or Call Us?
There are things you can safely check yourself. Confirm the posts haven’t been hit by a mower, check that the gates still swing on their full hinge travel, and look for standing water at the post base after rain – that tells you if drainage is undermining the footing. Those checks cost you nothing and help us price the job faster.
What you shouldn’t do is dig out a failed post and re-set it yourself. Jacksonville fence posts need to be set below the frost line and, more importantly here, deep enough to hold against wet-season soil expansion. A post set at 18 inches in loose Florida sand will lean again by the following spring. And if your CWS system carries an overhead gate or a pool enclosure panel, the tension on the frame is not something to release without the right bracing. We’ve fixed more homeowner-reset posts than we’ve ever seen hold. Call us at (904) 337-5929 and we’ll give you a straight number and a written scope – no surprises, which is how Curtis Lane has always liked it.
FAQs
A properly installed CWS aluminum system should last 20 – 30 years in Jacksonville, while vinyl systems typically run 15 – 25 years depending on sun exposure and installation clearances. The posting and hardware are what fail first in this climate, not the panels – salt air and wet-dry soil cycles do their damage at the connections. Call (904) 337-5929 if you need a post or rail assessed before a full replacement becomes necessary.
A leaning post can almost always be repaired – we remove it, inspect the rail connections, pour a new footing at the correct depth, and reset the post in spec. The fence only needs full replacement when the posts are rotted, the rails are compromised, or the sections are too far out of square to salvage. Most repairs are a fraction of full replacement cost, and we’ll tell you which one you’re looking at before any work starts.
A full CWS fence installation takes 2 – 4 days for a typical residential yard, and a single post reset or gate re-hang is a same-day job. Concrete footings need time to cure before we hang weight on them, so we schedule the set and the hang on separate days when the job requires it. We’ll put the timeline in your written estimate.
We carry CWS-compatible posts, rails, brackets, and gate hardware in standard residential sizes on our trucks, and we order OEM CWS parts for specific series from our supplier network when the job requires it. You’ll never be asked to source your own parts. We also work with other name-brand materials across our remodeling work, including KraftMaid cabinetry, Cambria and Silestone surfaces, and GAF roofing products.
Need a CWS fence installed or repaired in Jacksonville? Call (904) 337-5929 for a free estimate. A live person answers, the price is in writing before we start, and the work is guaranteed for a full year.
Written by Curtis Lane, Owner, Bradford Remodeling Co Jacksonville at Bradford Remodeling Co Jacksonville, serving Jacksonville and nearby areas.
