Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
PGT Bathroom Remodeling: The Jacksonville Owner’s Guide
PGT bathroom remodeling in Jacksonville typically runs $9,000 – $28,000 installed, depending on whether the work involves a full gut-out or a focused replacement like a walk-in shower conversion. Most owners discover they need help when water damage appears around the shower pan, grout lines crack along the substrate, or a tub surround pulls away from the wall. In our experience across Jacksonville, the failure usually starts quietly: a seal fails behind the tile, the subfloor softens, and by the time it’s visible, the repair scope has grown past a weekend patch job.
We carry and install PGT-compatible bathroom components for homeowners who want a disciplined, by-the-book remodel without the surprise invoices that plague this trade. If you’re staring at a failed surround or water-stained baseboard in Riverside, San Marco, or Mandarin, you’re in the right spot. Here’s what to know before you sign anything.
Key Takeaways
- PGT bathroom remodels in Jacksonville land between $9,000 and $28,000 installed, depending on scope and materials.
- The most common failure point is the shower pan and lower wall substrate, not the visible tile or glass.
- Bradford Remodeling Co Jacksonville is an independent contractor. We install PGT-compatible components but are not affiliated with PGT.
- Every job gets a written price before work starts, and every completed bathroom carries our 365-Day Done Right Promise in writing.
Which PGT Models This Applies To
PGT’s bathroom product lines show up in Jacksonville homes through a mix of builder-grade installs and mid-range remodel work, most commonly as tub surrounds, shower surrounds, and replacement glass enclosures tied to their window and door distribution network. The compatibility rule is simple: if your bathroom has a PGT-labeled surround or enclosure, the replacement components need to match the original substrate depth and drain location. PGT surrounds are typically built for a 60-inch tub alcove or a 48-inch shower base; swapping to a different size almost always means moving the drain, which changes the rough-in and the price.
On the parts side, we source PGT-compatible surrounds and enclosures through our documented roster of name-brand materials, alongside KraftMaid cabinetry, Cambria and Silestone surfaces, and Kohler or Moen fixtures for the surrounding build-out. The OEM-versus-aftermarket decision matters less for PGT than for, say, a window sash: the surround itself is often a vinyl or acrylic panel set that can be matched by dimension and finish. What fails first is rarely the panel. It’s the water management behind it.
One checkable specific: PGT surround panels are commonly 60 inches wide by 30 to 32 inches deep for tub replacements, but the original install frequently used a thinner backer board than we’d spec today. If the original surround lasted under ten years, the wall cavity behind it is usually the culprit, not the panel itself.
Styles & brands we work with
Signs Your PGT Bathroom Remodeling Is Failing
- Stains or softness at the base of the tub or shower surround. Water is wicking behind the panel and saturating the substrate. By the time the drywall outside the shower shows a stain, the framing behind it has been wet for months.
- Grout or caulk joints cracking repeatedly. This usually means movement in the wall assembly or a substrate that wasn’t bedded properly. Re-caulking buys weeks, not years, if the structure behind it is shifting.
- A persistent mildew smell that comes back after cleaning. Moisture is trapped where it shouldn’t be. In Jacksonville’s humidity, that trapped moisture feeds mold inside the wall cavity even when the surface looks fine.
- The shower pan flexes or creaks underfoot. A solid pan shouldn’t move. Flex means the support bed has failed or was never set right, and the pan will crack at the corners eventually.
- Tiles popping loose or sounding hollow when tapped. The thinset bond is gone, which means water has gotten behind the tile. Patching individual tiles doesn’t address the failed bond across the whole assembly.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here is the straight pricing picture for Jacksonville, because you should not have to call three contractors to get a number:
- Full PGT-compatible bathroom remodel: $9,000 – $28,000. This is a gut-to-finish job: demo, substrate replacement, new surround or tile, fixtures, flooring, and finish work, with every line item listed before the first nail goes in.
- Small bathroom remodel: $5,000 – $12,000. A compact full bath with a stock vanity, basic surround, and standard fixtures.
- Tub-to-shower conversion: $3,500 – $10,000. Removing the tub, rerouting the drain to a 2-inch shower line, and installing a walk-in surround with a poured or manufactured pan.
- Walk-in shower installation: $4,500 – $12,000. For existing shower footprints or expanding a stall shower into a larger walk-in configuration.
- Shower replacement only: $3,000 – $8,500. New surround, pan, valve, and trim with the existing plumbing location unchanged.
What drives the top of that range in Jacksonville specifically: moving the drain, replacing rotted subfloor and framing around the shower seat or curb, and upgrading to a full waterproofing system like a sheet membrane rather than relying on a basic vinyl pan. Bradford gives you a written price before any work starts and the number doesn’t move at the door. Parts are line-itemed, labor is line-itemed, and the 365-Day Done Right Promise covers the entire build for a full year in writing. If something fails inside that window, we return and correct it at no charge.
DIY or Call Us?
There are two things you can safely check yourself. First, look behind the escutcheon plate on the shower valve: if the tile or surround edge around it is cracked or the hole was never sealed, that’s a direct water path into the wall. Second, check whether the caulk joint between the surround and the tub deck is pulling away. Those observations help us scope the job over the phone.
What we don’t recommend doing yourself is cutting into the surround or pulling the pan. The moment you remove the waterproof layer, you’ve exposed whatever is behind it, and if the substrate is rotten, you have an open, actively leaking cavity in a Florida home where humidity never quits. Jacksonville building code requires plumbing changes to be permitted and inspected, and a botched pan replacement will fail inspection and leak. We pull the permits, pass the inspections, and hand you a signed written guarantee at closeout. Scope it right the first time, the job goes a lot smoother when nobody’s surprised.
If you’ve got a PGT bathroom surround that’s done, call (904) 337-5929. We’ll ask the right questions, give you a real number, and put it in writing before we ever schedule the crew.
FAQs
In Jacksonville’s heat and humidity, a properly installed PGT-compatible surround should last 15 to 20 years, but the original builder install often fails in 8 to 12 years because the substrate behind it wasn’t waterproofed correctly. The panel itself is rarely the problem; the wall assembly behind it is. If yours is failing early, we can tell you why during the estimate. Call (904) 337-5929 and we’ll take a look.
If the failure is limited to a caulk joint or a single cracked corner, a targeted repair can work. But if water has reached the substrate, no surface patch fixes the problem, because the structure behind the panel is compromised. We’d rather tell you that honestly at the estimate than sell you a repair that fails in eight months. Call us at (904) 337-5929 for an honest read on your specific situation.
A focused shower or tub-to-shower conversion in Jacksonville usually takes 5 to 7 working days. A full bathroom gut-out with custom tile, a new vanity, and moving plumbing lines runs 2 to 3 weeks, including permit inspections. We give you a start date and a finish date in writing before the job begins.
We keep common surround panels, pan materials, and valve rough-ins on hand for the jobs we schedule, and we source PGT-compatible replacements through our documented material roster, which also includes KraftMaid, Cambria, Silestone, Kohler, and Moen. If a specific panel or finish needs to be ordered, we tell you the lead time before you sign anything. Call (904) 337-5929 and we’ll confirm what’s available for your exact setup.
Written by Curtis Lane, Owner, Bradford Remodeling Co Jacksonville at Bradford Remodeling Co Jacksonville, serving Jacksonville and nearby areas.
