Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Boral Fence Installation: The Jacksonville Owner’s Guide
Boral fence installation in Jacksonville typically runs $3,500 to $9,000 for a standard residential lot, including materials, demolition of the old fence, and labor. We stock Boral-compatible posts, panels, rails, and hardware on our trucks, so most installations start within a week of the written estimate. You’ll usually discover the problem the same way every Jacksonville homeowner does: a post leaning after a summer thunderstorm, a panel cracked along the bottom rail from weed-eater contact, or a gate that suddenly drags because the hinge post rotted out at ground level.
Boral is a specific product line, not a generic term. It’s a wood-plastic composite fence system built around steel-reinforced posts and dense composite boards that resist rot, termites, and Florida humidity better than pine or cedar. When a Boral fence fails in Jacksonville, it’s almost never the boards themselves. It’s the post footing, the hardware, or improper installation from the previous contractor. Curtis Lane has seen more failed Boral fences in Jacksonville than he cares to count, and the pattern is consistent: shortcuts at the post hole are what kill these fences, not the material.
Which Boral Models This Applies To
Boral sells its fence system under a few product names, most commonly Boral TruExterior Fence and the Boral CompositFence line. The TruExterior boards are a poly-ash composite, which is why they hold paint better than vinyl and resist the swelling and shrinkage that plague wood in Jacksonville’s wet-dry cycles. The CompositFence line runs a wood-plastic formula closer to what you’d see in a composite deck board.
Here’s the compatibility gotcha most Jacksonville homeowners never hear: Boral fence panels are not interchangeable between the two systems at the rail and post level. The TruExterior posts have a steel insert that accepts a specific bracket system. The CompositFence posts use a routed channel. If you have a TruExterior fence and someone tries to save money by fitting CompositFence rails, the connection point will be sloppy from day one, and the warranty on the installation won’t mean anything because the system wasn’t assembled to Boral’s spec. Before we quote a repair or replacement, we identify which system you have by checking the embossing on the back of a board and measuring the post profile. Boral stamps their boards, and that stamp tells us everything we need to order the right parts.
On the OEM versus aftermarket question: for Boral specifically, we install OEM Boral boards and posts. The composite formulation matters for both expansion rates and color match, and aftermarket boards don’t match Boral’s color codes. For hardware like screws, brackets, and post caps, we use either Boral’s own hardware or a stainless equivalent rated for coastal exposure. Jacksonville’s salt air is a factor even a few miles inland, and cheap galvanized hardware on a Boral fence starts showing rust staining within two years.
Styles & brands we work with
Signs Your Boral Fence Installation Is Failing
- Leaning post at the gate hinge. The gate post takes more lateral load than any other post in the fence. If the footing was poured too shallow or too narrow, the post rocks and the gate drops out of alignment. This is the most common Boral failure we see in Jacksonville, and it usually starts within three to five years on fences installed by the lowest bidder.
- Cracked or snapped rail at a post connection. Boral rails expand and contract with temperature, and Jacksonville’s summer heat can push a rail to within a quarter-inch of its full expansion. If the installer butt-jointed the rail tight against the post instead of leaving the manufacturer’s specified gap, the rail cracks at the bracket. You’ll see a hairline split right at the screw line.
- Boards pulling away from the bottom rail. This usually traces back to a post that shifted out of plumb, which torques the board fasteners. It’s not the boards failing; it’s the structure underneath. Tightening the visible screws won’t fix it because the post is still moving.
- Fence line that waves or bows between posts. Boral boards are dense and heavy, and they need mid-span support on longer runs. If a previous installer stretched the post spacing past Boral’s maximum recommendation to save on posts, the whole section sags. Jacksonville’s sandy soil compounds this because footings settle unevenly.
- White chalky residue or rust streaks on hardware. That’s either cheap fasteners corroding or, on painted TruExterior boards, efflorescence from trapped moisture. In both cases the issue is installation detail, not the Boral material itself.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For a full Boral fence installation in Jacksonville, plan on $3,500 to $9,000 depending on linear footage, fence height, access, and how much demolition is involved in pulling the old fence. A standard 6-foot-tall Boral privacy fence on a typical Jacksonville lot runs toward the middle of that range. An 8-foot fence with steel-reinforced posts on a corner lot with mature root systems runs toward the top.
Every Boral fence quote we write includes the same line items, in writing, before the crew shows up: demolition and haul-off of the old fence, post hole excavation to below Jacksonville’s typical root line, concrete footings, the Boral posts and panels themselves, hardware, gate assembly, and cleanup. Nothing moves at the door. Our written price is the price. If we discover underground surprises during excavation, like a buried cable or an old concrete footer, we stop and show you before anything changes. The 365-Day Done Right Promise covers the full installation for a year after close: if a post shifts, a gate sags, or a board fails inside that year, we return and correct it at no charge. You leave the site with a signed written guarantee in your hand, not a verbal promise.
| Fence Type | Typical Installed Range (Jacksonville) |
|---|---|
| Boral fence installation (full, 6 ft) | $3,500 – $7,000 |
| Boral fence installation (8 ft, steel-reinforced posts) | $6,000 – $9,000 |
| Vinyl fence installation (comparable, for reference) | $3,500 – $9,000 |
| Aluminum fence installation (comparable, for reference) | $4,000 – $10,000 |
DIY or Call Us?
Boral fence work is not a high-tension job like garage door springs, and it’s not an electrical hazard. But it is heavy, structural work that goes wrong in ways that don’t show up for a year. You can safely check your posts with a level, measure the gap between boards on a hot afternoon to see if expansion was accounted for, and inspect hardware for rust. What you shouldn’t do is reset a steel-reinforced Boral post by hand. A 6-foot Boral post with its steel insert weighs more than most homeowners expect, and if the footing isn’t set correctly in Jacksonville’s sandy soil, the post will lean again within months. We’ve reset dozens of DIY post jobs across Jacksonville. The material wasn’t the problem; the footing depth and concrete mix were.
If you’re replacing a single broken board, that’s a reasonable Saturday project with the right Boral color code and a drill. If you’re looking at a leaning post, a failed gate, or more than two boards, call (904) 337-5929. We’ll match the part, price it in writing, and scope it right the first time, which is the only way a fence job stays done in Florida weather.
FAQs
A correctly installed Boral fence in Jacksonville lasts 20 to 30 years on the composite material itself, with the steel-reinforced posts rated for the same range. The weak points are the hardware and the footings, which is why our written guarantee covers the full installation for a year and why we use stainless or Boral-spec fasteners from the start. Call (904) 337-5929 if you’re seeing rust or post lean before year five.
Yes, in most cases we can replace individual posts, rails, or boards as long as we can identify the Boral product line and color code from the existing boards. The limitation is color match: Boral’s composites hold color well, but a board installed years ago will have some UV shift, and a single new board may read slightly different for the first season. We’ll tell you before you pay whether a repair or a full section replacement is the better value. Call (904) 337-5929 for a written repair quote.
Most standard Boral fence installations in Jacksonville go from demolition to final walkthrough in two to four working days, depending on linear footage and how much old concrete is in the ground. Gate work and 8-foot panels add a day. We’ll give you a written timeline with the quote, and the date we give is the date the crew shows up.
We keep Boral-compatible posts, rails, brackets, and hardware on our trucks for the most common Jacksonville fence configurations, which covers most repair calls on the first visit. For unusual panel sizes or less common Boral color codes, we order from our documented material roster and schedule the repair as soon as the part lands. Bradford Remodeling Co Jacksonville is an independent service provider and not affiliated with Boral; we also work with KraftMaid, Cambria, and Silestone lines on our interior projects.
If your Boral fence is leaning, cracked, or down, call (904) 337-5929 for a free, written estimate on repair or full replacement. We’ll tell you what failed, what it costs, and how long it takes, before you spend a dollar.
Written by Curtis Lane, Owner, Bradford Remodeling Co Jacksonville at Bradford Remodeling Co Jacksonville, serving Jacksonville and nearby areas.
