Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Therma-Tru Construction in Neptune Beach, FL | Bradford Remodeling Co Jacksonville
We provide independent Therma-Tru door construction, repair, and replacement service across Neptune Beach, FL, as your local General Contractor - Neptune Beach. We’re not a factory-authorized dealer, and we don’t pretend to be. What we are is a local crew that has pulled apart enough salt-corroded door frames and swollen beach-cottage slabs to tell you exactly what’s wrong before we touch a single screw. Call (904) 337-5929 for a written price before any work starts.
Neptune Beach has its own building department, its own coastal codes, and a 30-foot height limit that changes how door replacements get permitted. That matters when you’re swapping a Therma-Tru unit on a 1960s bungalow. We know which questions the inspector will ask, and we answer them before the job starts so you aren’t surprised at the end. If you’re weighing repair versus replacement on a Therma-Tru Classic-Craft, Smooth-Star, Pulse, or Benchmark system as part of a Neptune Beach Kitchen Remodeling or entry project, we’ll give you straight numbers and a scope you can read.
Why Neptune Beach Residents Choose Us for Therma-Tru Service
Salt-laden air does things to door hardware that inland contractors don’t see. In Neptune Beach, we routinely find rust bleeding from steel hinge screws on ground-level cottages, weatherstripping rotted out on Pulse patio doors, and Classic-Craft slabs that have swelled a full quarter-inch from ocean humidity. Our crews work on these systems every week, from original 1960s entry units on Lemon Street to modern fiberglass doors on elevated new builds off Florida Boulevard. We know which models hold up to salt spray and which hinge seals fail first.
Curtis Lane runs our crew, and he’s spent nearly three decades swinging a hammer and managing jobs across the Southeast before settling into Jacksonville work. He learned the trade at Los Angeles Trade-Technical College and has seen enough botched coastal door installs to be particular about flashing and wind-load ratings. Scope it right the first time, the job goes a lot smoother when nobody’s surprised. That’s how we run every Therma-Tru job in Neptune Beach.
We carry common Therma-Tru replacement parts locally, so we can match existing door styles without waiting on factory authorization. We also put every price in writing before we start, and every completed job carries the 365-Day Done Right Promise. If the work fails within that year, we come back and fix it at no charge.
Styles & brands we work with
Common Therma-Tru Construction Problems We Solve in Neptune Beach
- Warped or swollen door slabs on older Classic-Craft units. Ocean-driven humidity pushes moisture into the rail and stile construction, and the slab grows. You’ll notice the deadbolt not throwing cleanly, or the door sticking against the jamb in summer. We check the slab for structural soundness first. If the core is intact, we re-hang and adjust. If the slab is blown out, we replace it with a Coastal-rated fiberglass unit.
- Corroded hinge screws and rust bleeding from steel frames. Salt-laden air in Neptune Beach attacks bare steel fasteners fast. We see this constantly on ground-level beach cottages where the original builder used standard hinges. We replace with stainless steel hardware and re-torque everything to spec.
- Failed weatherstripping and bottom sweeps on Pulse patio doors. Nor’easters drive rain sideways into the track and the seals let go. Water intrusion shows up as swelling at the threshold or a persistent damp smell. We replace weatherstripping with OEM-compatible profiles rated for repeated wind-driven rain exposure.
- Fogged or cracked glass inserts on Smooth-Star doors. Wind-borne debris during hurricane season takes out glazing on older inserts. We source replacement glass units that match the original profile and re-seal to keep salt moisture out of the frame.
- Frame corrosion on beach-level installs. When the frame itself is rotted or corroded beyond patching, repair stops being the right call. We recommend full replacement with a modern fiberglass unit rated for coastal wind loads, properly flashed and anchored to the rough opening.
Therma-Tru Service in Neptune Beach: What Local Conditions Mean for Your Equipment
Here’s the part most contractors skip. Neptune Beach enforces a 30-foot height limit and requires coastal construction permits through its own building department, not Duval County’s. Any Therma-Tru door replacement on an older bungalow gets reviewed for wind-borne debris compliance before installation can be approved. That’s different from Jacksonville Beach, which has different elevation and glazing rules. We’ve seen homeowners buy a door first, then find out the glazing doesn’t meet the wind-borne debris zone requirement for their specific lot. Now they own a door they can’t legally install. We check the code requirements for your address before we order anything. On a 1970s single-story home on Lemon Street, we found the original Therma-Tru Smooth-Star entry door had swollen so badly from years of ocean humidity that the deadbolt wouldn’t throw. We replaced the slab and frame with a new Classic-Craft fiberglass unit rated for 150 mph wind loads, added stainless steel hinges to resist salt corrosion, and re-flashed the rough opening to meet current FEMA elevation requirements. The homeowner was surprised we could match the original six-panel profile without changing the cottage’s character. That’s the job done the way Neptune Beach actually requires it.
Therma-Tru Models & Products We Service in Neptune Beach
We work on the four Therma-Tru lines that show up most often in Neptune Beach housing: Classic-Craft Fiberglass Entry Doors, Smooth-Star Fiberglass Doors, Pulse Series Patio Doors, and Benchmark Door Systems. Each has a different failure pattern here. Classic-Craft slabs swell at the rail and stile joints. Smooth-Star glass inserts crack under thermal stress and storm debris. Pulse patio doors lose their weatherstripping and sweeps to nor’easter-driven rain. Benchmark units, often builder-grade, show hinge corrosion first because the factory hardware isn’t stainless.
We use genuine Therma-Tru components for critical sealing and locking hardware when available. For older discontinued styles, we source quality aftermarket weatherstripping and hinges that match the original profile. Our crews can usually start repair work on the same visit because we stock common seals, sweeps, and hinge hardware locally for fast Neptune Beach turnaround. For full door system work, we also handle Therma-Tru sales & service and coordinate every step from tear-out to final inspection.
See the difference
Before
After
Before
After
Before
AfterTherma-Tru Service Pricing in Neptune Beach
Here are the numbers we quote most often on Neptune Beach Therma-Tru work. These are market-calibrated ranges, and you’ll get a written line-item price before anything starts.
| Service | Price Range |
|---|---|
| Therma-Tru entry door replacement (Classic-Craft) | $8,000 – $25,000 |
| Therma-Tru patio door weatherstripping replacement | $400 – $1,800 |
| Therma-Tru door slab only replacement (if frame is sound) | $2,000 – $6,500 |
| Emergency & storm damage door repair | Scoped on site; written quote before work starts |
| Impact window installation (paired with door replacement) | $8,000 – $25,000 |
Cost drivers in Neptune Beach include whether your lot falls in a wind-borne debris zone, whether the existing frame is salvageable, and whether FEMA elevation requirements force a pan-flash or threshold change. A free estimate from us means we walk the door, check the codes for your address, and hand you a written price. No numbers that move at the door. Call (904) 337-5929 to schedule that estimate.
Serving Neptune Beach, FL - Our Local Coverage Area
We’re based in the Neptune Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – Therma-Tru Construction in Neptune Beach
Yes, if the frame is structurally sound and not corroded, we can replace only the slab. We’ll check the jamb, threshold, and hinge mortises first. Expect $2,000 to $6,500 for a slab-only replacement, depending on the model and size.
Therma-Tru fiberglass doors hold up better than wood or steel, but the hardware doesn’t. We recommend stainless steel hinges and stainless fasteners on every coastal install, plus a marine-grade sweep at the threshold. With those changes, a Classic-Craft or Smooth-Star unit will perform well for years in salt air.
If the slab has swelled more than a quarter-inch or the frame has taken on water, replacement is usually the better call. A warped slab that won’t let the deadbolt throw is a security issue, not a cosmetic one. We’ll give you a written price for both repair and replacement so you can decide with real numbers. Call (904) 337-5929 for an exact quote.
It can, depending on your FEMA flood zone and the scope of work. Many original beach bungalows have non-conforming foundations under current maps. A door replacement alone usually won’t trigger elevation, but if you’re also re-framing or changing the rough opening, the city may require a pan-flash detail and possibly a threshold elevation adjustment. We check your address against current FEMA maps before quoting so you aren’t surprised.
Yes. We match the panel profile, glass configuration, and finish on Classic-Craft and Smooth-Star lines. For discontinued styles, we can often source a match or get close enough that the difference won’t read from the street. We’ll show you the options in writing before we order.
Service Areas Near Neptune Beach
We provide Therma-Tru construction service across the coastal corridor. That includes Neptune Beach service area work, plus nearby Therma-Tru service in Jacksonville and Therma-Tru service in Jacksonville Beach. We also cover select projects in Ponte Vedra Beach and Yulee. If you’re close to the water and have a Therma-Tru door acting up, call us.
Book Your Therma-Tru Service in Neptune Beach Today
Get a written price before any work starts. Call (904) 337-5929 and we’ll schedule your free estimate. For storm-damaged doors that can’t wait, a live person answers the phone 24/7. We’ll get it scoped, priced, and squared away.
Written by Curtis Lane, Owner at Bradford Remodeling Co Jacksonville, serving Neptune Beach since 2004.
