Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Aluminum Fence Installation Cost in Jacksonville?
Aluminum fence installation in Jacksonville, FL typically costs between $4,000 and $10,000 for an average residential project in 2026. Most homeowners we work with across Duval County pay around $6,500 for a standard 150-linear-foot installation with two gates. The price covers materials, labor, concrete footings, and all hardware, with a written quote before any work starts.
Aluminum runs higher than vinyl or pressure-treated pine up front, but it handles Jacksonville’s salt air and summer storms better than either one. You are paying for metal that won’t rust through at the gate post or sag in the August heat. We’ll walk through exactly what that $4,000 to $10,000 range includes below.
Aluminum Fence Installation Cost Breakdown (2026)
Here is a line-by-line look at where the money goes on a typical Jacksonville aluminum fence job. These figures reflect what we’re seeing across Arlington, Mandarin, Riverside, and the beaches in 2026.
| Line Item | Cost Range (Jacksonville, 2026) |
|---|---|
| Aluminum panels and posts (per linear foot, installed) | $28 – $45 |
| Gate (single walk gate, 4 ft) | $500 – $900 |
| Gate (double drive gate, 10 – 12 ft) | $1,200 – $2,400 |
| Concrete footings (per post) | $18 – $35 |
| Post caps and hardware | $5 – $12 per post |
| Site prep and leveling | $350 – $800 |
| Old fence removal and disposal | $400 – $1,000 |
| Permit fees (City of Jacksonville) | $75 – $200 |
So a 100-linear-foot backyard fence with one walk gate lands around $4,000 to $5,200. Step up to 200 linear feet with a double drive gate and you’re at $8,000 to $10,000. The jump from low end to high end is driven by four things: linear footage, gate count, post spacing, and site conditions.
Post spacing matters more than most homeowners realize. Aluminum fence panels are engineered for posts every six to eight feet. If the install crew stretches that to nine or ten feet to save a few dollars on materials, the panels flex and the gate sags inside two years. The Garrison Standard, which Bradford Remodeling operates under, requires posts no more than six feet on center for aluminum. You’ll see that in writing on the quote, not just in a sales pitch.
What Affects Aluminum Fence Installation Pricing in Jacksonville
Your specific property has more to do with the final number than the state of the aluminum market. Here are the five factors that move the price most in this area.
- Soil conditions and the frost line. Most of Jacksonville sits on sand or sandy loam. That’s good news for digging, but it means footings need to be wider than in clay to resist the lean you get after a hard summer storm. In Mandarin and along the St. Johns, we set posts 30 to 36 inches deep with wider bell footings. That adds labor but stops the fence from listing toward the water table.
- Salt exposure at the beaches. Atlantic Beach, Neptune Beach, and Jacksonville Beach demand a marine-grade powder coat and stainless hardware. Standard powder coat and zinc hardware look fine for six months, then rust starts at the bolt heads. Budget an extra $8 to $12 per linear foot near the coast.
- Gate hardware and automation. A single walk gate is predictable. A double drive gate with an opener, keypad, and safety sensors runs $1,800 to $3,200 in Jacksonville, depending on swing versus slide. Slide gates cost more but handle the tight setbacks you see in Riverside and Avondale better.
- Existing fence removal. If a previous owner ran vinyl or chain link around the yard, that has to come out before the job starts. Removal and haul-off in Duval County runs $400 to $1,000 depending on linear footage and whether the old posts are set in concrete or just driven into sand.
- Permitting and setbacks. The City of Jacksonville requires a permit for fence installation over 6 feet in most residential zones. We handle the permit paperwork, but the fee is a line item on your written quote. Also, some HOAs in communities like Nocatee or Bartram Park require a specific color profile and panel style. It’s worth checking the HOA covenant before you commit to a style.
If you want to see where your property lands in that $4,000 to $10,000 window, call us at (904) 337-5929. We give a written quote, not a rough guess, and the number we write down is the number you pay.
How to Save on Aluminum Fence Installation
There are a few ways to hold the cost down without sacrificing the fence you’ll have for the next 20 years.
- Keep the design standard. The panel you pick matters. Flat-top aluminum panels run $3 to $6 less per linear foot than spear-top or finial styles. If you don’t need spear tops for pool code, a clean flat-top panel in black or bronze looks sharp and saves money on a 150-foot run.
- Plan the gates carefully. Every gate adds $500 to $2,400 depending on width and hardware. One wide walk gate instead of two narrow ones cuts the hardware count. And if you’re automating, a slide gate avoids the swing-radius grading work sometimes needed in Riverside’s older lots.
- Bundle the project. Many Jacksonville homeowners install an aluminum fence around a pool or patio area at the same time Bradford handles the hardscaping or a paver patio installation. Same site mobilization, same permit visit, less total labor.
- Get the written quote first. This is not a small-ticket line item. Every estimate from Bradford Remodeling gives you a line-by-line written price before any work begins. It means you can compare bids without sitting through a pressure pitch. Call (904) 337-5929 for a free estimate, and we’ll put the numbers on paper.
Why Aluminum Makes Sense in Jacksonville’s Climate
Jacksonville’s climate punishes wood and coaxes rust out of steel. Aluminum is the one fencing material that shrugs off both. Here’s what we tell homeowners who are weighing aluminum against vinyl, wood, and chain link.
Wood fences in Northeast Florida start showing rot at the post base within four to six years, especially in shaded yards in Ortega or along the Ortega River where moisture hangs around. Vinyl handles the sun fine but turns brittle after enough UV exposure and cracks at the rail joints during afternoon thunderstorms. Steel rusts, period, in salt air.
Aluminum’s drawback is rigidity. It will not absorb impact the way vinyl or wood does. If a car backs into the gate post, the post bends and the panel needs replacing. But for a fence that stands straight through a decade of Jacksonville summers and hurricane seasons, aluminum is the most predictable material we install.
Aluminum vs. Vinyl Fence Cost in Jacksonville
We often get asked how the two stack up, because vinyl is the other big residential player in Duval County.
- Vinyl fence installation in Jacksonville runs $3,500 to $9,000 for a typical residential project, per our vinyl fence installation pricing.
- Aluminum fence installation in Jacksonville runs $4,000 to $10,000 for the same footprint.
That $500 to $1,000 difference buys you better wind tolerance, longer life in direct coastal air, and a narrower rail profile that doesn’t block sightlines the way thick vinyl panels can. If you live west of I-295 or in Oakleaf, vinyl is a fine choice and costs less. If you’re east of the Intracoastal or want a fence around a pool where the HOA demands a specific black metal profile, aluminum is the right call.
We install both, and we do not steer one way or the other for the sake of a bigger invoice. What we do is put both numbers in writing and let the scope, the HOA, and the climate drive the decision.
What’s Included in Bradford Remodeling’s Aluminum Fence Installation
Bradford Remodeling Co Jacksonville is part of the Garrison Partners family, and that relationship shapes what happens on your fence job. Here is what a written Bradford quote includes, item by item:
- All materials: aluminum panels, posts, post caps, gate frames, hinges, latches, and concrete.
- Digging and footings: every post set to city code depth for your zone, in concrete, no shortcuts.
- Gate installation: hung, squared, and adjusted so it swings level on day one and day 400.
- Site cleanup: the old fence, the dirt from the post holes, and all packaging leave with the crew.
- Written guarantee: the 365-Day Done Right Promise is part of Bradford’s standard fence scope. If the work does not hold within that first year, Bradford returns and corrects it at no charge.
Curtis Lane heads up the Jacksonville operation. The crews that show up are background-checked and uniformed, and a live person answers the phone at (904) 337-5929 24 hours a day, seven days a week. No answering service runs your fence question through a script.
Jacksonville Neighborhood Pricing Notes
Jacksonville is not one uniform market. The same fence job can price differently in Murray Hill than in Julington Creek Plantation, and the reasons are not always obvious.
In Riverside and Avondale, older lots are small and often have existing chain link or rotted wood that has to come out first. Crew access can also be tight. These factors tend to push jobs toward the higher end of the range per linear foot, even though total footage is low.
In south Jacksonville, from Baymeadows down to Mandarin, the soil drains faster and is easier to dig. A straightforward rectangle with two gates in this part of town often lands at or below the $6,500 midpoint for 150 linear feet.
At the beaches, salt air changes the hardware spec as noted above. It’s a legitimate material upgrade, not a contractor add-on. Atlantic Beach code also requires specific gate clearances for pool fencing that other parts of town do not, and that can add to the hardware count.
Does an Aluminum Fence Add Value to a Jacksonville Home?
In Jacksonville’s market, a well-installed aluminum fence returns value in three ways: curb appeal at listing, pool safety compliance, and lot definition in neighborhoods where property lines get fuzzy. Appraisers do not assign a fixed dollar amount to a fence the way they do to a kitchen or a bath, but a straight, proper black aluminum fence reads as upkeep, and upkeep reads as a home that has been maintained.
If your aluminum fence supports a pool enclosure that meets Florida code, that is a saleability issue in Jacksonville, where so many lots are platted with pools fronting the St. Johns River or the Intracoastal. A fence that fails a pool inspection is a non-starter. Bradford builds pool fences to the Florida Building Code clearance and latching requirements the first time, because the last thing a homeowner needs is a pool fence that passes the curb but fails the inspector.
FAQs – Aluminum Fence Installation Cost
Here are the pricing questions we hear most from Jacksonville homeowners, answered with the numbers up front.
How much does aluminum fencing cost per linear foot in Jacksonville?
Installed aluminum fence panels in Jacksonville run $28 to $45 per linear foot, including posts, concrete, and hardware. That’s the all-in number for a standard 4-foot to 6-foot residential panel, not the bare panel price you’d pay at a supply yard.
How much is 100 feet of aluminum fence in Jacksonville?
A 100-linear-foot aluminum fence with one gate typically lands between $3,500 and $5,200 installed in Jacksonville. If the site has to be cleared of an old fence or concrete first, expect the higher end of that range.
Is aluminum fence more expensive than vinyl in Jacksonville?
Yes, by about $500 to $1,500 on a typical project. Aluminum fence installation runs $4,000 to $10,000 in Jacksonville, while vinyl fence installation runs $3,500 to $9,000 for similar scope. The difference reflects metal’s longer coastal life and stronger wind performance.
How long does an aluminum fence last in Jacksonville’s climate?
A properly installed aluminum fence with a marine-grade powder coat lasts 25 to 30 years in Jacksonville’s climate, including at the beaches. The panels are rust-proof and the powder coat is warranted against chalking by the manufacturer. Post footings are the failure point, which is why Bradford sets them in concrete and stands behind them.
Can you install an aluminum fence in one day in Jacksonville?
Most residential aluminum fence projects in Jacksonville run two to three days depending on the soil and the gate hardware. A simple 100-foot run with one walk gate can often be set on day one and fully hung, gated, and cleaned by early day two. Call (904) 337-5929 and we’ll give you a straight answer on your timeline along with your written quote.
Written by Curtis Lane, Owner at Bradford Remodeling Co Jacksonville, serving Jacksonville, FL as part of the Garrison Partners family.
Pricing reflects the Jacksonville market as of 2026. Bradford Remodeling Co Jacksonville offers free estimates – call (904) 337-5929.
What Our Customers Say
"Home remodel with a new floor plan. Handled structural work and permits without drama."
- Gus R."Painting and drywall repair were flawless. They patched the drywall seams and the paint matches the old wall."
- Cal P."Replaced old windows and trim while redoing the kitchen. Clean finish work."
- Ron F.
