Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Countertop Installation Cost in Jacksonville?
Countertop installation in Jacksonville, FL typically costs between $2,000 and $6,500 for an average kitchen, with most homeowners landing around $3,800. Material choice drives the spread more than anything else – laminate starts near the low end while natural stone and engineered quartz push toward the top. This is the full installed price including templating, fabrication, delivery, and labor, not just the slab.
If you’re weighing countertops against a larger kitchen project, our home page lays out how we price the full remodel. But if you’re zeroing in on surfaces specifically, this guide gives you the Jacksonville numbers you’ll actually see on a written quote.
Key Takeaways
- Full countertop installation in Jacksonville runs $2,000 – $6,500 in 2026, with labor and fabrication making up roughly 40% of that.
- Quartz and granite land in the $60 – $110 per square foot range installed; laminate runs $25 – $50.
- Most mid-size kitchens (30 – 40 square feet of counter) take 1 – 2 days once the slab is fabricated.
- Bradford Remodeling gives a written price before any work starts – not an estimate that moves at the door.
- Every installation carries the 365-Day Done Right Promise: if the work fails inside a year, we come back and fix it at no charge.
Countertop Installation Cost Breakdown (2026)
Here are the real Jacksonville numbers by material, installed. These include fabrication, edge profiles, sink cutouts, and standard backsplash trim. Your square footage, seam count, and edge profile will move you within the range.
| Material | Cost per Sq Ft (Installed) | Typical 30 Sq Ft Kitchen | What You Get |
|---|---|---|---|
| Laminate | $25 – $50 | $750 – $1,500 | Budget-friendly, decent durability, limited heat resistance |
| Tile | $30 – $70 | $900 – $2,100 | Custom looks, grout lines to maintain |
| Butcher Block | $40 – $80 | $1,200 – $2,400 | Warm look, needs regular sealing |
| Solid Surface (Corian) | $50 – $90 | $1,500 – $2,700 | Seamless appearance, repairable |
| Granite | $60 – $110 | $1,800 – $3,300 | Natural stone, heat resistant, needs sealing |
| Quartz (Cambria, Silestone, Caesarstone) | $70 – $120 | $2,100 – $3,600 | Non-porous, no sealing, consistent patterns |
| Marble | $80 – $150 | $2,400 – $4,500 | High-end look, stains easily, high maintenance |
| Quartzite | $90 – $160 | $2,700 – $4,800 | Natural stone with quartz-like durability |
The $2,000 – $6,500 lead range assumes a kitchen with 30 – 45 square feet of countertop. Smaller kitchens with laminate or butcher block will come in under $2,000. Large kitchens with an island, waterfall edges, and natural stone can push past $6,500. A 50-square-foot quartz kitchen with a waterfall island edge is a $5,500 – $7,000 job in Jacksonville, and that’s a fair number to plan around.
Labor is the second-biggest line item after materials. Fabrication typically runs $30 – $50 per square foot, and installation adds another $25 – $40. Demolition and haul-away of old counters runs $200 – $600 depending on the material and how many linear feet you’re pulling. In older Jacksonville homes – Riverside, Avondale, San Marco, Murray Hill – we regularly see extra time for shimming and leveling on unlevel cabinet runs, which adds 1 – 2 hours of labor.
What Affects Countertop Installation Pricing in Jacksonville
Material choice is the headline factor, but there are five other line items that shift your number. Here’s what actually moves the needle in the Jacksonville market:
- Square footage and seam count. A standard 10-foot run with one seam is straightforward. An L-shaped kitchen with a peninsula and an island might need three seams. Each additional seam adds $100 – $250 in fabrication and fitting time.
- Edge profile. A standard eased or bevel edge is included in most quotes. Ogee, waterfall, and mitered edges add $10 – $30 per linear foot in fabrication labor. Waterfall edges on islands – popular in newer Nocatee and Bartram Park builds – add $800 – $1,500 per side.
- Sink and cooktop cutouts. A standard undermount sink cutout is usually included. Farmhouse (apron-front) sinks, pot fillers, and wall-mounted faucets require extra templating and cutout precision. Expect $150 – $400 per additional cutout beyond the standard sink.
- Slab size and color tier. Natural stone slabs are priced in tiers. Exotic granite and quartzite with dramatic veining run $30 – $50 more per square foot than entry-level colors. In Jacksonville, materials are sourced through distributors on the Southbank and in Arlington – distance from the distributor to your home doesn’t typically move price, but slab selection day matters.
- Demolition and disposal. Removing old countertops runs $200 – $600. If the old material is tile set in mortar, demolition takes longer and costs more. Old granite and quartz have to be hauled – they can’t go in standard residential bins.
- Cabinet condition. Countertops need a level cabinet base. If your base cabinets have water damage or settling – common in Jacksonville’s humid climate, especially in pier-and-beam homes in Avondale and Ortega – we may need to level or reinforce the run before templating. That’s $150 – $600 in prep work.
One factor that should not affect your price: the quote itself. Bradford Remodeling puts a written price in front of you before any work starts. That number includes material, fabrication, labor, demo, and disposal. If the site conditions change mid-job, we document it, explain it, and get sign-off before any additional work happens. No surprise invoices.
Countertop Installation Cost by Jacksonville Neighborhood
Jacksonville is spread across 747 square miles, and the housing stock varies hard by neighborhood. That affects what you’ll pay for countertop installation, mostly through prep work and access.
Riverside, Avondale, and San Marco
These neighborhoods hold 1920s-1940s homes with cabinets that have settled over decades. We frequently see out-of-level bases, plaster walls that need protection, and narrow doorways that complicate slab delivery. Countertop jobs here run $200 – $600 higher in prep labor than newer construction. Many of these homes also carry historic-district review requirements, which we handle in the scope before you sign.
Jacksonville Beach, Atlantic Beach, and Neptune Beach
Beachside homes contend with salt air, which means more stainless steel fixtures and more homeowner demand for non-porous quartz that resists humidity and staining. Quartz is the dominant material in the Beaches. Installation cost is comparable to the city average, but material selection skews $10 – $20 per square foot higher.
Mandarin and Julington Creek
This is 1980s-2000s suburban stock with fairly standard cabinet layouts. Countertop jobs in Mandarin tend to land at the mid-range of our prices with fewer surprises. The biggest variable is kitchen size – many of these homes have larger kitchens with islands, which means more square footage and more seams.
Nocatee, Bartram Park, and Oakleaf
Newer build areas. Many homeowners here are doing countertop replacement within 5 – 10 years of the original build, swapping builder-grade laminate for quartz or granite. The work is straightforward, but HOA rules sometimes restrict contractor hours and delivery windows. We coordinate that in the written scope.
How to Save on Countertop Installation
Countertop installation in Jacksonville doesn’t have to be a $6,500 job. Here’s how we’ve seen homeowners get a better number without cutting corners on the wrong things:
- Pick a mid-tier material. Entry-level granite and level-1 quartz run $60 – $80 per square foot installed. You get a stone surface that lasts decades at a price closer to high-end laminate. The bigger the kitchen, the more this saves you.
- Keep the edge profile simple. Eased and bevel edges are usually included. Waterfall edges and ogees are where fabrication costs pile up. Save the waterfall for the island if it matters to you, and keep the perimeter simple.
- Reuse your existing sink. If your sink is in good condition, keeping it saves $150 – $400 in cutout and reinstallation work. This only applies to undermount and drop-in sinks in good shape – farmhouse sinks require a full recut.
- Time your project outside peak demand. Jacksonville’s contractor season peaks after Labor Day and again in early spring. Scheduling your countertop work in mid-summer or right after the holidays can sometimes mean quicker fabrication turnaround and more slab availability.
- Ask about remnant slabs. For smaller kitchens, bathroom vanities, or a bar top, remnant slabs from larger jobs can cut material cost by 40 – 60%. We maintain a running remnant inventory through our fabricators and will match you to one if the square footage works.
- Get a written price first. Free estimates are the litmus test. Compare the written numbers, not the verbal ones. A contractor who won’t put a number in writing before work starts will move it after. Call us at (904) 337-5929 and you’ll get a written price for your Jacksonville countertop job – no obligation and no pressure to sign.
The Garrison Standard is the framework behind how Bradford prices work. Every quote is documented. Every change order is in writing. Every warranty term is signed before the first tool comes out. That’s not a savings tactic – it’s the only way to know what you’re actually paying for.
FAQs – Countertop Installation Cost
How much does countertop installation cost per square foot in Jacksonville?
Installed countertop cost in Jacksonville runs $25 – $160 per square foot depending on material. Laminate starts around $25 – $50 per square foot installed. Quartz and granite run $60 – $120. Marble and quartzite push $80 – $160. The per-square-foot number includes fabrication, labor, and standard cutouts. For a detailed look at the service itself, see our Countertop Installation in Jacksonville page. Call (904) 337-5929 for an exact written quote – estimates are free.
Is it cheaper to repair or replace countertops?
For chips and cracks, repair runs $150 – $600 in Jacksonville. Full replacement runs $2,000 – $6,500. If your countertop is laminate with water damage, repair is often a losing battle – the substrate swells and delaminates, and patching won’t last. For stone, a chip repair can buy you a few more years. But if you’re repairing every six months, replacement is the cheaper long-term play. We’ll tell you straight which one applies to your surface. Call (904) 337-5929.
Can you install countertops same-day?
No. Countertop installation in Jacksonville is a multi-step process: measure and template, fabrication (typically 7 – 14 days, depending on the material and fabricator’s queue), then installation. Installation day itself is usually 1 – 2 days. If you’re on a tight timeline, we’ll tell you in the written quote exactly when fabrication will be complete and when the install happens – not a vague “soon.” Call (904) 337-5929 for a timeline based on your exact material.
How much does a kitchen island countertop cost?
A kitchen island countertop in Jacksonville runs $600 – $2,000 depending on material and square footage. A typical 4-by-6-foot island at 24 square feet costs $600 – $1,200 for granite, $1,700 – $2,900 for high-end quartz, and $2,200 – $3,800 with waterfall edges on two sides. This is for the countertop only – a full kitchen island installation including cabinetry runs $3,000 – $10,000. For an exact number on your island, call (904) 337-5929.
Do I need to seal my countertops after installation?
It depends on the material. Quartz (including Cambria, Silestone, and Caesarstone) never needs sealing – it’s non-porous. Granite and marble need sealing every 6 – 12 months; the installer typically does the first seal. Butcher block needs oiling every 30 – 60 days in Jacksonville’s humidity, which swells wood faster than drier climates. Laminate and solid surface need no sealing. We’ll give you a written care sheet for your material at job close, with the Garrison Code requirements for maintenance documented.
What “Squared Away” Looks Like at Job Close
Here’s what a Bradford countertop installation actually looks like when it’s done:
- The site is swept and cleaned. No slab remnants, no adhesive drips, no dust on your cabinet fronts.
- Every seam is tight to within 1/16 inch and color-matched to the surface.
- The sink is reconnected, the faucet runs, and the plumbing is leak-tested before we leave.
- You have a written scope showing what was installed, what it cost, and the warranty terms.
- Your 365-Day Done Right Promise is in your hand, signed, covering the installation for a full year.
Bradford Remodeling has operated as part of the Garrison Partners family since 2004, held to The Garrison Standard on every job. Our technicians are background-checked and uniformed, so you know exactly who’s walking through your door before they arrive. And when you call our number, a live person answers – 24 hours a day, 7 days a week. Not a voicemail, not a callback queue.
We install documented, name-brand surfaces: Cambria, Silestone, and Caesarstone quartz, premium granite and marble, solid surface, and butcher block. Every material comes with manufacturer specs and warranties that stand behind our own guarantee. Specifications are traceable. Quality is not left to guesswork.
If you’ve been burned by a no-show or a contractor who repriced at the door, you already know why a written quote matters. We’ll give you a real number for countertop installation in Jacksonville, in writing, before any work starts. Call (904) 337-5929 for a free estimate – answered by a real person, day or night.
Written by Curtis Lane, Owner at Bradford Remodeling Co Jacksonville, serving Jacksonville since 2004.
Pricing reflects the Jacksonville market as of 2026. Bradford Remodeling Co Jacksonville offers free estimates – call (904) 337-5929.
What Our Customers Say
"Home remodel with a new floor plan. Handled structural work and permits without drama."
- Gus R."Painting and drywall repair were flawless. They patched the drywall seams and the paint matches the old wall."
- Cal P."Replaced old windows and trim while redoing the kitchen. Clean finish work."
- Ron F.
