Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Fast, Reliable General Contractor Across Jacksonville Beach
Most coastal remodels fail from the fasteners outward. In Jacksonville Beach, we see it every season: zinc-plated nails bleeding rust streaks down new fascia, interior-rated window frames pitting within two hurricane cycles, deck joists rotting at the screw holes because someone used untreated lumber and called it done. Salt air does not negotiate.
Bradford Remodeling Co Jacksonville builds for that environment. We are the General Contractor team that puts coastal-spec materials in the written price up front, not as a change order when the inspector flags it. If you are planning a kitchen, bath, whole-home, or addition in Jacksonville Beach, call (904) 337-5929 and we will walk the property, check the flood zone, and hand you a line-item quote that already accounts for what the salt and the FEMA maps demand.
Why Bradford Remodeling Co Jacksonville Is Jacksonville Beach’s Preferred General Contractor Company
We operate under The Garrison Standard, which means a written price before the first tool comes out and a signed 365-Day Done Right Promise at close. No numbers move at the door. No scope drifts. Curtis Lane runs the Jacksonville operation with the same discipline that has held the Garrison Partners family together since 2004.
Jacksonville Beach homeowners call us because we know what the city’s inspectors look for. FEMA Base Flood Elevation, breakaway wall requirements, corrosion-resistant strapping. These are not add-ons here. They are the job. Our crews are background-checked and arrive in uniform. You know who is walking through your door before they knock. And when you call, a live person answers. 24/7. Not a queue.
Styles & brands we work with
Remodeling Contractor in Jacksonville Beach
A Remodeling Contractor in Jacksonville Beach is not the same hire as one in inland Jacksonville. The coastal code changes the scope before you pick a tile. We factor in elevated mechanicals, floodplain compliance, and marine-grade fasteners from the first walkthrough. If you are renovating a kitchen, bath, or whole home near the oceanfront, the written price you get from us reflects that reality.
Kitchen and Bath Scope on the Coast
Kitchen remodels in Jacksonville Beach typically run $14,000 – $45,000. That range covers tear-out, rough-in, cabinetry, counters, and finish work, with the coastal-spec hardware already included. Bathroom remodels run $9,000 – $28,000, and if we are opening walls, we plan for what old beach cottages hide: cast iron drains, salt-corroded boxes, and framing that needs attention before tile goes down.
FEMA Compliance Before Cosmetics
Many Jacksonville Beach remodels require elevating mechanicals and using breakaway walls below the Base Flood Elevation. A cosmetic kitchen update on a 1950s cottage can turn into a floodplain compliance project the moment the inspector sees the mechanical room. We sequence the permit path first. That is why our quotes hold. The compliance work is priced on day one, not discovered at rough-in.
Licensed General Contractor in Jacksonville Beach
A Licensed General Contractor in Jacksonville Beach carries the permit burden so you do not learn the hard way that a load-bearing wall needs an engineer’s stamp. We pull permits, schedule inspections, and sign off on the city’s post-storm compliance checks. If you are adding a room or converting a garage, the FEMA elevation question is not optional. It is the first line on our scope sheet.
Additions and Whole-Home Work
Home additions in Jacksonville Beach run $45,000 – $130,000, and the coastal-spec difference is real. Impact-rated windows, stainless fasteners, and pressure-treated or composite framing rated for salt exposure add cost up front and subtract replacement cost for a decade. Whole-home remodels pull every trade together under one written price. No surprise invoices at drywall.
The Garrison Standard on Every Job
Every project closes with a clean site and a signed written guarantee in your hand. The 365-Day Done Right Promise means if the work does not hold within a full year, Bradford comes back and corrects it at no charge. That applies to the rough-in, the finish, and the flashing. Curtis Lane’s crews are held to The Garrison Code on conduct and cleanup, site by site.
Trusted Brands We Service in Jacksonville Beach
We install documented, name-brand materials with manufacturer specs behind them. On Jacksonville Beach jobs we lean on James Hardie siding for fiber cement that shrugs off salt spray, GAF roofing systems with corrosion-resistant fasteners, and Therma-Tru doors rated for coastal wind loads. For kitchens and baths we use KraftMaid and Wellborn cabinetry, Cambria and Caesarstone surfaces, and Kohler and Moen fixtures. We keep local stock for Jacksonville Beach customers, so a warranty swap does not wait on a truck from inland.
For roofing, we also work with Owens Corning, IKO, and Tamko products, matched to the wind uplift and exposure of the specific property. You get the manufacturer’s warranty on top of ours.
See the difference
Before
After
Before
After
Before
AfterCommon General Contractor Problems We See in Jacksonville Beach Homes
- Zinc-plated fasteners on roofing and siding. Standard zinc hardware corrodes within two hurricane seasons here. We spec stainless or hot-dip galvanized on every exterior connection, and the price difference is about 15% more on hardware, not thousands.
- Poured slabs that miss the FEMA Base Flood Elevation. We have seen new concrete torn out because the elevation was never confirmed before the pour. A Jacksonville Beach contractor checks the flood map before the formwork goes up, every time.
- Untreated lumber for beachside fence posts and deck joists. Salt moisture wicks into untreated pressure-treated wood and rots it at the fasteners within five years. We use marine-grade or composite framing where the fence or deck faces ocean wind.
- Original cast iron drains and salt-corroded electrical boxes in 1940s and 1950s cottages. South of Beach Boulevard especially, we find these behind decades of weathered siding. We swap drains for PVC and rewire with marine-grade components, then pass the city’s inspection on the first visit.
Pricing for General Contractor in Jacksonville Beach, FL
Coastal-spec costs more up front and less within a decade. That is the honest math. A kitchen remodel in Jacksonville Beach runs $14,000 – $45,000. Impact window installation runs $8,000 – $25,000. A bathroom remodel runs $9,000 – $28,000. The spread is driven by square footage, whether we are opening load-bearing walls, and how much FEMA compliance the property requires.
| Project | Jacksonville Beach Price Range |
|---|---|
| Kitchen Remodel | $14,000 – $45,000 |
| Impact Window Installation | $8,000 – $25,000 |
| Bathroom Remodel | $9,000 – $28,000 |
Every quote is written, line-itemed, and fixed before work starts. Call (904) 337-5929 for a free estimate on your specific scope.
We Also Serve Cities Near Jacksonville Beach
Bradford Remodeling Co Jacksonville serves Jacksonville Beach and the surrounding coastal communities, including Neptune Beach, Ponte Vedra Beach, Atlantic Beach, and the beaches side of Jacksonville proper. The same coastal-spec pricing and Garrison Standard apply across the service area. Dispatch and scheduling are coordinated from our Miami office; crews live and work locally in Jacksonville Beach.
Serving Jacksonville Beach, FL - Our Local Coverage Area
We’re based in the Jacksonville Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About General Contractor in Jacksonville Beach
Yes. Any load-bearing wall change requires a permit, an engineer’s stamp on the beam specification, and city inspection. In Jacksonville Beach, the permit path also runs through FEMA floodplain review if the wall is below the Base Flood Elevation. We pull the permit and schedule the inspections as part of the written scope. Call (904) 337-5929 to have us check your specific cottage.
Because the salt air and windstorm code force material upgrades that inland quotes skip. Stainless or hot-dip fasteners instead of zinc, impact-rated window frames, marine-grade electrical components, and often FEMA elevation work on the mechanicals. The same kitchen plan might be $2,000 to $5,000 more here than ten miles inland. That is not markup. It is the coastal spec, priced honestly.
A breakaway wall is a non-structural wall below the Base Flood Elevation designed to fail under flood load without taking the elevated structure with it. If your garage conversion is below the BFE, it likely needs breakaway walls or flood vents. We confirm the flood zone first, then design the conversion so it passes inspection the first time. Call (904) 337-5929 for a free site check.
We cut out the cast iron back to sound pipe, transition to PVC, and pressure-test the new drain lines before the inspector arrives. In these old cottages south of Beach Boulevard, we also replace salt-corroded electrical boxes with marine-grade enclosures during the same rough-in. Then we call for inspection once, not three times. The inspection fee is included in your written price.
Yes. If your original scope specified standard paver joints and you want the salt-tolerant sealed version, that is a written change order with its own price, signed before the work changes. We do not do verbal add-ons. The upgrade typically adds $800 to $2,500 depending on square footage and joint condition. The written price protects both sides. Call (904) 337-5929 and we will spec it before you sign.
Written by Curtis Lane, Owner at Bradford Remodeling Co Jacksonville, serving Jacksonville Beach and the surrounding coastal communities.
